Jinan Ruihai Hydraulic Machinery Co., Ltd. is one of the domestic manufacturers specializing in the production of hydraulic lifts and lifting platforms. There are eight series and more than 60 varieties of lifts, lifting platforms, aluminum alloy lifts and lifting freight elevators. The specifications are complete and the quality is guaranteed. The products are all in line with national industry standards, and are widely used in indoor and outdoor decoration of construction industry, workshops, stations, supermarkets, halls and other high-altitude operations and industrial production lines. The elevators and lifting platforms produced by our company are sold all over the country and are well received by users.
1. In order to ensure that the aluminum alloy elevator is in good working condition, check the performance before use: whether the control button is valid; whether the power cord and socket are intact; whether the oil pipeline is intact; the stability of the guardrail; the fastening of the bolts at each junction; the appearance quality intact.
2. When the aluminum alloy elevator power-on indicator is on, press the up button, the motor rotates and the lifting platform does not rise. This may be caused by the three-phase power supply being reversed and the motor is reversed.
3. The aluminum alloy lift should work strictly according to its specified load capacity. Overload work may cause damage to personnel and goods; working on the lifting platform without safety guardrail will cause the personnel to fall, causing casualties.
4. When the aluminum alloy elevator is working, it is necessary to support the expenditure legs and adjust the leg bolts so that the lifting platform can be smoothly stressed by the legs and maintain the level; during the lifting process and in the raised state, the lifting platform must not be moved, and it is strictly prohibited to be on the lifting platform. shake.
5. When the aluminum alloy elevator works abnormally, it should be stopped immediately to avoid serious damage to the lifting platform; the electrical equipment must be checked before use. If it is shaft oil hole, it must be lubricated before each use.
6. After the lift is finished, the parts should be cleaned and cleaned. When not working, the table should be lowered to the lowest position to avoid rust on the surface of the piston rod.
In order to ensure the service life of the lifting platform, it is necessary to use special personnel to operate and keep it as safely as possible. Any non-electrical professional shall not disassemble the electrical appliance at will to prevent accidents.
For more details, please do not hesitate to call Jinan Ruihai Hydraulic Machinery Co., Ltd. (http://).
Light Steel Structure has been widely
applied in civilian facilities in the recent years. The structure uses cold
roll galvanized steel plates and has the features of: light weight, easy
installation, low price, recyclable, clean building site, etc. The elements are
manufactured and partially assembled in the factory and only installation is required on the work
site. 
Light Steel House,Light Steel Building,Prefabricated Light Steel House,Cold Rolled Light Steel House
Zhongda Steel Structure , http://www.zhongdametal.com