Pneumatic one-way diaphragm pump 6 big function

Pneumatic diaphragm pump is small in size, easy to use, stable and easy to shake, is a pump to use a more convenient pump, which contains many pump-specific performance, is now available on the market range A relatively wide range of pumps. The following let me Xiaobian to describe the following pneumatic one-way diaphragm pump 6 function. Pneumatic one-way diaphragm pump 6 function 1, due to the air as power, so the flow rate with the back pressure (outlet resistance) changes and automatically adjust, suitable for medium and high viscosity fluid. Centrifugal pump operating point is set on the basis of water, if used for slightly higher viscosity fluid, you need to support reducer or inverter, the cost has greatly improved, the same is true of the gear pump. 2, pneumatic diaphragm pump in a flammable environment with pneumatic pump reliable and low cost, such as fuel, gunpowder, explosives delivery, because: First, the ground is not likely to spark; second, no heat generated during work , The machine will not overheat; Third, the fluid will not overheat because the diaphragm pump agitates the fluid to a minimum. 3, poor construction sites, such as construction sites, industrial and mining wastewater discharge, due to the impurities in the sewage and complex composition, easy to plug the pipeline, so the formation of the pump on the load is too high, the motor heat vulnerable. Pneumatic diaphragm pump through the particles and the flow rate can be adjusted, the pipeline automatically stop blocked to patency. 4, the other small pneumatic diaphragm pump easy to move, do not need the foundation, accounting for the ground is extremely small, easy and economical installation. Can be used as mobile material transfer pump. 5, in a hazardous, corrosive material handling, diaphragm pump can be completely separated from the outside world. 6, pneumatic diaphragm pump can be used to transport more unstable chemical properties of fluids, such as: photographic materials, such as flocculation. This is because diaphragm pumps have low shear forces and little physical impact on the material. Pneumatic diaphragm pump in the role of industry is huge, and many difficult to human hand can be completed by the pneumatic diaphragm pump, indirectly ensuring the safety of the work of staff. Further reading: industry leaders IFAT China Guangzhou Exhibition building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: gogoing (QQ / WeChat: 181817456) Starting: http://beng.liuti.cn/ (Service Hotline: 400-6030-811)