Four special fertilization techniques

In addition to nitrogen, phosphorus and potassium fertilizers, cherry tomatoes should be supplemented with calcium and boron fertilizers. The production of 1000 kg of cherry tomatoes requires 3.85 kg of pure nitrogen, 1.15 kg of phosphorus pentoxide, and 4.44 kg of potassium oxide. Before planting, apply 5,000 kg of organic fertilizer per mu, 200 kg of bio-organic compound fertilizer, 50 kg of urea, 30-50 kg of superphosphate, 40 kg of potassium sulfate, 100 kg of calcium fertilizer and 1.5 kg of borax. Generally, when the first ear fruit begins to expand, the first top dressing can be carried out, and 5 kg of pure nitrogen and 6 kg of potassium oxide per acre are applied. The second top dressing is to harvest the first ear of fruit, and when the second ear is swollen, apply 5 kg of pure nitrogen per acre and 6 to 7 kg of potassium oxide. The third top dressing is about to be harvested in the second ear, and when the third ear is swollen, 4 kg of pure nitrogen per acre and 5 to 6 kg of potassium oxide are applied.

The growth of colorful peppers and peppers requires sufficient nutrition. The production of 1000 kg of colorful peppers requires 4.2 kg of pure nitrogen, 1.1 kg of phosphorus pentoxide, and 6.5 kg of potassium oxide. At the same time, an appropriate amount of calcium fertilizer is needed. Before planting, apply 4,500 kg of organic fertilizer per acre, 150 kg of bio-organic compound fertilizer, 50 kg of urea, 25 kg of superphosphate, 50 kg of potassium sulfate, and 100 kg of calcium fertilizer. When the seedlings are over and the first ear is grown to the size of the walnut, the first top dressing is carried out, applying 5 kg of pure nitrogen per acre and 6 kg of potassium oxide. When entering the first ear fruit (men pepper) is about to be harvested, the second layer of fruit (for pepper) and the third layer of fruit continue to expand and the third layer of fruit is falling and fruit setting is the peak of fertilizer demand, should be reapplied the second time Topdressing, applying 6 kg of pure nitrogen per mu and 7-8 kg of potassium oxide. The third top dressing was carried out about half a month later, and the amount of fertilizer applied was the same as the second time. After 15 to 20 days, the fourth top dressing was carried out, and the amount of fertilizer applied was the same as the first time.

The thorn-free cucumber has no thorn cucumber and is fertilized. When the organic fertilizer is applied, the NPK fertilizer is applied. Adding molybdenum fertilizer can increase the vitamin content in the fruit and reduce the nitrate and nitrite content. The production of 1000 kg of thorn-free cucumber requires 2.6 kg of pure nitrogen, 1.4 kg of phosphorus pentoxide, and 3.5 kg of potassium oxide. The amount of fertilizer required in the final period accounts for more than 80% of the total fertilizer requirement. Before planting, apply 5,000 kg of organic fertilizer per acre, 250 kg of bio-organic compound fertilizer, 60 kg of urea, 30-40 kg of superphosphate, and 50 kg of potassium sulfate. The first top dressing was carried out at the beginning of the melon, and the pure nitrogen was applied 3 to 4 kg per mu and the potassium oxide was 4 to 6 kg. In the early stage of the melon, the second topdressing was carried out, and 3 to 4 kg of pure nitrogen per acre and 5 to 6 kg of potassium oxide were applied. In the middle of the melon, the third top dressing is applied, with 3 to 4 kg of pure nitrogen per acre and 5 to 6 kg of potassium oxide. Spray 0.02% to 0.05% ammonium molybdate during the fruiting period.

In the Netherlands, the soybean seedlings are supplemented with nitrogen fertilizer, and the phosphorus and potassium fertilizers are added during the growth period. Pay attention to the application of molybdenum fertilizer and manganese fertilizer. The production of 1000 kg of peas requires 2.4 kg of pure nitrogen, 0.8 kg of phosphorus pentoxide and 5.7 kg of potassium oxide. Before planting, apply 2500 kg of organic fertilizer per mu, 100 kg of bio-organic compound fertilizer, 20 kg of urea, 25-30 kg of superphosphate, 40 kg of potassium sulfate, and 0.5-1 kg of manganese sulfate. Into the extension of the vines, the first top dressing, 3 kg of pure nitrogen per mu, 4 to 6 kg of potassium oxide. In the flowering and pod-forming stage, the second top dressing was carried out, applying 2 to 2.5 kg of pure nitrogen per acre and 3.5 kg of potassium oxide. Spray 0.02% to 0.05% ammonium molybdate at the flowering stage.
【Comment】 【Print this article】 【Close this page】 【Large, medium and small】

Case Hydraulic Parts

Brand new: this product is brand new, if you have any questions about our products, please feel free to contact us, we will solve it for you in time.
High-quality built: our Case Hydraulic Main Pump is made of high-quality materials, which is durable and has a long service life.

Our ecommerce store offers a full listing of Case gear pumps, drive pumps, pump seal kits, relief valves, and gaskets alike. Whatever your Case Hydraulic Parts need, we`re here to help you fill it. Axial pump assemblies, gerotor gear sets, and even shafts and couplers are our specialty!

Hydraulic Piston Pump, Duplex Pump, Short-Stroke Pump, Noise/Vibration Reduction, High Self-Priming Ability, Rotational Stability, High Efficiency, High Pressure, Compact Size, Reduction of Overall Length.

We export GENUINE PUMP, OEM PUMP, AFTERMARKET PUMP. We are specialized in OEM PUMP & AFTERMARKET PUMP. We export 95 NATIONS. Please contact us If you need STABLE SUPPLIER.Case hydraulic pumps for the machine models listed below are available ex stock or with a short delivery.

Case Hydraulic Main Pump,Case Main Hydraulic Pump,Case Hydraulic Pump,Case Hydraulic Pump Spare Parts,Case Hydraulic Main Pump Assembly,Case Main Pump,Case Pump,Case Hydraulic Parts,Case Excavator Parts

Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.juheng-cn.com