First off, gather your materials—old towels, lighters, screwdrivers, and anything else you might need. Wrap the anti-theft buckle securely in an old towel, making sure only the buckle itself is exposed. Now, carefully use a lighter to heat the top of the buckle. It should catch fire pretty quickly, but remember, the flame gets extremely hot, so handle it with care and keep your fingers away from the heat.
After around a minute, the plastic at the top of the buckle should start to soften. Using a screwdriver, gently pry the softened plastic upward. As you do this, you’ll notice a small spring popping out, but don’t worry; there’s still a tiny rotating button inside. Keep heating it for another half-minute or so to ensure everything loosens up properly.
Next, take your screwdriver and gently break through the inner part of the plastic casing. Once you’ve done that, you can lift the center buckle. Inside, you’ll find a few small steel balls and a metal cap. Carefully unwrap the old towel and remove the final pin holding it together. And voila! If you're curious about mastering this technique even faster or have questions, feel free to reach out to experts who might have more tips. It’s always good to double-check your work and make sure everything’s secure before putting it back together.
Yuyao Shuguang stainless steel bearing Co., LTD , https://www.shuguangbearing.com