Alright, let me walk you through this step-by-step so it’s clearer and more detailed. First things first, gather your tools—old towels, lighters, and a sturdy screwdriver. Take an old towel and carefully wrap it around the anti-theft buckle. Make sure the buckle itself is exposed while the rest is snugly covered. Now, grab your lighter and gently heat the exposed part of the buckle. Be cautious here because the flame gets pretty hot; don’t rush or hold it too close. Usually, it’ll ignite almost instantly, but keep your fingers away from the heat.
After about a minute passes, you’ll notice the plastic on top starting to soften. Use the tip of your screwdriver to gently pry it up. As you do this, you’ll see a small spring pop out. However, there should still be a tiny rotating button inside. Keep the flame going for another half-minute or so, just long enough to make sure everything loosens up a bit more.
Once that’s done, take your screwdriver again and carefully crack open the plastic casing surrounding the inner mechanism. With some effort, you should be able to lift the central buckle upward. Inside, you’ll find a couple of small steel balls and possibly a steel cover. To finish, simply unwrap the old towel and fish out any remaining pins or pieces. If you’re curious about mastering this technique even faster, maybe chat with someone who’s already an expert at it—they might have some insider tips!
Just remember, practice makes perfect, and always prioritize safety. Mishandling tools like lighters or sharp objects can lead to accidents, so proceed with care. If you ever feel unsure, it’s best to leave it to professionals. And hey, don’t forget to clean up after yourself—you wouldn’t want any leftover bits lying around!
Yuyao Shuguang stainless steel bearing Co., LTD , https://www.shuguangbearing.com