The use of barriers in residential parking management systems plays a crucial role in ensuring security and smooth vehicle access. The core principle of the Daozha system involves the controller sending a switch signal to the barrier when a card is swiped. This signal activates the motor, which then drives the barrier via a speed reducer to raise or lower it. When the gate is closed, it sends a signal to confirm its position and ensure proper operation.
When operating the barrier system, it's essential to first verify that the power supply voltage matches the device specifications. In case of any malfunction, it’s recommended to contact professional maintenance or return the unit to the factory for repair, as improper handling can worsen the issue and affect future performance. It's also important to note that within one year of purchase, theå‡é€Ÿ oil (deceleration oil) should be replaced regularly. Routine checks on the wiring and connectors are necessary to maintain optimal function. The controller must remain clean, and care should be taken to prevent water or other harmful substances from entering the unit. Avoid using organic solvents for cleaning the housing, as they may cause damage.
The DC power supply for the controller is 12V, while the reader requires 14V. The system allows for a delay automatic stop function, which can be adjusted based on the door stroke setting. A typical initial time setting is around 145 seconds. During the commissioning of the gate brake, a short circuit to ground will trigger the brake rod to rise automatically, indicating normal operation.
When managing the parking lot system, always be mindful of vehicles and pedestrians to avoid accidental damage. Most gates are equipped with pressure waves that allow them to spring open automatically, preventing damage to the brake rods. In the event of a power outage, the gate can be manually opened. If the lever is in a horizontal position, follow the arrow on the clutch and rotate the clutch button to disengage it. This allows the gate to be lifted either automatically or manually. When a call comes in, pressing the OFF key will reset the clutch, returning the lever to its lowered position and restoring normal operation.
Regular maintenance and proper usage are key to ensuring the longevity and reliability of the system. Always follow the manufacturer’s guidelines and seek professional assistance if needed.
The multispectral filter is precisely produced by the composite process of photolithography + coating. The deposition mask is produced by the high-precision reproduction photolithography technology, and the high-performance filter film of each spectrum segment is successively plated within the deposition pattern. Multi-spectral filters have high transmittance and excellent filtering characteristics. Multiple filter channels are integrated into a single substrate, and the spatial alignment accuracy is extremely high.
Multispectral Filter,Multispectral Imaging Applications,Multispectral Optical Filter,Optical Filters
Changchun Champion Optics Co.,Ltd , https://www.champion-optics.com