Wood flooring is a kind of decoration material that many friends like. After we use it, in order to make the interior more beautiful, we will choose to wax the floor from time to time. However, many friends think that they don't know how to wax the floor, and they don't know how to do it. So everyone knows how to repair and wax the wooden floor? Today, Xiaobian will take a look at the wooden floor repair waxing method and precautions!
Wood floor repair waxing method
1. Remove rubbish and dirt from the floor surface, use a vacuum cleaner to remove rubbish and dust from the surface of the wooden floor, and then wipe the stain on the floor with a diluted neutral detergent.
2, fully dry, the surface of the wooden floor and the moisture in the groove can be dried before waxing can begin. Depending on the season, the time required varies, and it takes about half a day.
3, cover the furniture, cover the skirting line and furniture with tape paper to prevent the floor wax from polluting the skirting and furniture.
4. Shake the floor wax, shake the container with the floor wax, and mix well.
5. Evenly wax, carefully apply according to the grain of the wooden floor, not leaking or uneven thickness. If the amount of application is too small, uneven thickness will occur, and if it is applied too much, the film formation will be poor.
Wood floor repair waxing precautions
1. To prevent the detergent from accumulating in the groove, the rag soaked with detergent should be wrung out as much as possible. Floor wax removers can cause stains and bulging on the floor and must never be used. Wipe with a wrung rag. Wipe with a rag that has been wrung out. The surface of the floor, especially the grooved part, should be carefully wiped and no detergent remains. If the detergent and moisture are left behind, it will cause whitening and swelling.
2. Everything should be carefully dried: if it is not fully dried, the floor wax will not adhere to the surface of the floor, affecting the appearance and whitening.
3, at least three times the wax, each time with a lint-free cloth or waxer to rub the floor to make the wax oil into the wood.
4, in order to get the consequences of shining, every time you hit the wax, you should use a soft cloth to lightly polish.
5, each time, after drying, use a very fine sandpaper to polish the appearance, wipe clean, and then play the second time.
There are a lot of problems to be aware of when we are repairing and waxing. It is a key issue to learn how to do it. The above is the wooden floor repair waxing method and precautions that Xiaobian introduced to you today. It is over here. For more information, please continue to pay attention to the decoration home.
More related wonderful reading:
What are the repair and waxing of wooden floors? Wood floor repair waxing method
All Protect Surface Protection Roll
Plastic Floor Protector Roll,Plastic Floor Protector,Hardwood Floor Protector,Floor Covering Protection
Suzhou Surface Protective New Material Technology Co.,Ltd , https://www.surfaceprotective.com