Wallpaper is one of the common wall decoration materials. The wallpaper has a variety of patterns and colors, which can fully provide us with choices. However, many people will choose to put stickers on their own hands, so today Xiaobian wants to share it for everyone. The wall wallpaper is how to paste and wallpaper what are the precautions.
Wall wallpaper how to paste step one
The first thing to do is to do the wall surface treatment. The wallpaper needs a smooth wall surface, so we need to use a scraper to scrape the impurities on the wall surface. Grooves and cracks need to be paved with gypsum powder. Then, the base film is poured into a bucket, and an appropriate amount of fresh water is added and stirred evenly, and then the well-mixed base film is evenly coated on the wall.
Wall wallpaper how to paste step two
We also need to measure the height of the house and cut the length of the wallpaper. In order to make the pattern of the wallpaper symmetrical, the length of the crop should be increased by 8-10 cm depending on the situation. If there is no pattern on the wallpaper, cut it directly.
Wall wallpaper how to paste step three
3. The next step is to brush the glue on the wallpaper. After brushing the glue, fold the brushed wallpaper and allow the glue to fully absorb. After the absorption, the wallpaper will be pulled open and the order will be posted. The first wallpaper is generally posted at the door. After it is attached, use a scraper from the top down, gently scrape the wallpaper from inside to outside, and squeeze the bubbles and excess glue to make the wallpaper evenly cling to the wall. Then cut off the excess wallpaper from the upper and lower ends. Wait until all the wallpapers are well pasted, then use a wet sponge to wipe all the glue that remains on the surface of the wallpaper, and the wallpaper will be affixed.
What are the notes on wallpaper?
1. The surface of the wallpaper should be smooth, must not have a clear sense of concavity, the pattern of the wallpaper must be consistent, the pattern should be neat. If the wallpaper pattern cannot be well connected, the visual effect will be greatly reduced.
2. The wallpaper should be neat and tidy on the baseboard, walls and edges, and it should not be contaminated. After the wallpaper has been attached, it must be closed for more than 48 hours. During the closed 48 hours, ventilation is prohibited.
3. The wallpaper is no matter how it is said to belong to paper, so it cannot be deducted by hand. Be careful in handling the furniture and try to avoid friction with the wallpaper.
Xiao Bian summary: The above is a small series of wall wallpaper for everyone to share how to paste and what the wallpaper notes, in fact, it is not difficult to paste wallpaper, but we must be careful, hope that the above sharing can help to you, if you need to know more For more relevant information, please continue to pay attention to the website of this website.
Long Radius Elbow refers to that the radius of curvature is 1.5 times of the elbow pipe diameter; if greater than 1.5 times, that is bend. long radius elbow is the most common, usually the default is long radius, high pressure or high velocity areas will use long radius, if it is solid conveying bend pipe big resistance,will use a larger radius. If there are no conditions or did not indicate in the contract, the preferred is long radius elbows.
Product Name:Long Radius Elbow
Size:DN10-DN2500
Materials: A234 WBP-WP1-WP12-WP11, A403 WP 304-304L-316-316L, A402 WPL3-WPL 6,A860 WPHY 42-46-52-60-65-70,PG370,C20
Thickness: 2mm-100mm
Standard:GB/ANSI/ GOST/ JIS/ DIN
Crafts: Butt, Push System, Simmer
Connection: Welding
Package: Wooden boxes,Wooden pallets,According to customer requirements.
Brand Name: HY
Place of Origin: China (Mainland)
Certification: ISO.UKS.SGS.BV
Application: Chemical, Water, Oil and gas, Electricity
Long Radius Elbow
Long Radius Elbow,Seamless Carbon Steel Elbow,Stainless Steel Elbow ,Long Radius Bend
CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com