The hydropower project is the most important inspection project for house inspection when it is delivered to the house. Because it is a secret project, even if a problem arises, it cannot be discovered. Therefore, what are the precautions in the installation of hydropower? Let's take a look at the basic requirements of the hydropower installation project and the precautions for hydropower installation.
Basic requirements for hydropower installation
1. The installation of the water supply pipeline must be firm, vertical and horizontal, components must be complete, the interface should be tightly leak-free, bracket selection must be correct, the installation spacing should be uniform, the surface of the pipeline clean without scratches, functional performance The test must be qualified and the pipe marking should be correct.
2. The installation of the drainage pipeline should be firm, the slope direction should be correct, the components should be complete, the interface should be completely leak-free, the pipeline must be kept unblocked, non-clogging, the selection of the floor drain must be correct, and the water seal must meet the requirements. Ensure that there is no scratch on the surface of the pipe, and the functional test must be qualified.
3. The embedded casing has to be of the same elevation, the nozzle needs to be smooth, the floor height of the floor board must be the same, and the anti-corrosion coating must be evenly brushed. The pipeline must be kept tight and free from heat, and the surface should be flat.
4. The layout of the spray pipe should be reasonable, and should be arranged neatly, lined into a line and so on. The components must be complete and the interface must be leak-free.
5. The installation and layout of the equipment should be reasonable, the arrangement should be neat, the elevation must be consistent, the operation must be normal, and safety and reliability ensured. Pipes and brackets should be evenly painted, without falling, pinholes, bubbles, and uniform color.
6. Ensure that the appliance is firmly installed, and the joints with the wall and floor must be tight and parallel. The chair on the surface of the appliance should be clean and free from pollution, damage, and leakage.
Hydropower installation precautions
1. Do not buy wires and pipes for free, and the prices of hot and cold water pipes are relatively large. The quality and material are not the same. If you need to use ultra-high power appliances, be sure to speak in advance with the plumber and choose Corresponding wires. Should also consider the seat, the switch position, but also the layout of the furniture to reserve the wire and set the position.
2. The pipelines should be laid in a regular manner. They must not be cross-cut and must not be excessively cross-bridged. Water and electricity in kitchens and bathrooms are mainly based on the supplier's plan. Do not make your own claim.
3. Photographs must be taken after the installation of water and electricity , and they should be saved. Once the problem arises, the correct position of the water circuit can be found accurately when the problem arises.
Xiao Bian concludes: The above are the basic requirements of the hydropower installation project shared by Xiao Bian for everyone and the installation considerations of hydropower. I hope the above sharing can help you. For more information, please continue to pay attention to this website.
PP ( Uniaxial geogrids ) : Ultimate Tensile Strength 30kN/m to 300kN/m, PP geogrids (Uniaxial ) range : Flexurally stiff biaxial monolithic and integrally formed Geogrid constructed of PP- Polypropylene or HDPE – polyethylene by a unique punching and drawing process .
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.
Extruded Pp Uniaxial Geogrid, PP Uniaxial Geogrid, Ux Geogrid Used For Road Construction
Feicheng Lianyi Engineering Plastics Co., Ltd , https://www.lianyigeosynthetics.com