Usually, the surface of the panel furniture must be treated to ensure that the furniture can be more durable. The process includes the following aspects:
a, original veneer veneer: common veneer color from light to deep, there are cherry wood, maple, white peony, red sorghum, ash, white oak, red oak, teak, huanghuali, red pear, walnut, White shadow wood, red shadow wood, red sandalwood, ebony and so on. In the manufacturing process, the solid wood is cut into wood chips of about 2 mm thick, which are attached to the surface of the furniture by special adhesion, and then lacquered and baked with ultraviolet rays. The characteristics are that the touch is smooth, and the wooden board with a finger buckle has a thick feeling and a surface grain. Clear but irregular, the 1mm right and right veneer can be seen at the corner of the plate. This kind of furniture is the top grade in veneer furniture, which is generally more expensive.
b. Log composite veneer: layered with layers of different colors of raw wood, glued to form wood by high pressure resin, and then sliced ​​from the section to form a new type of veneer with different colors and different wood types.
c. Log color leather: This type of furniture is relatively cheap. The general price is 2/3 to 1/2 of the wood veneer, but it is more likely to be scratched and rolled up during use.
d. Plastic veneer: This kind of veneer is a petrochemical product. The surface is printed with wood grain and floral decoration by a public printing machine, and the back is made of rubber. It is made by hot pressing precision instrument.
e, fireproof board: fireproof board veneer wear-resistant and not afraid of hot, there are wood grain, plain surface, stone pattern or other floral ornaments, mostly used for panel furniture, kitchen utensils, etc.
Xianghe home network editor, the article comes from the Internet.
I System description:
Heat Shrinkable Sleeve with hot melt adhesive, having properties of excellent insulating, environmental sealing, and resistant to impact and abrasion. It is designed for applications to seal and protect electrical splices, cable terminations and joints where electrical insulation and water proof are required. 3:1 shrink ratio allows it easily fit over irregular shape and large connectors.
II Features
>Resistant to UV-radiation
>High electrical insulation
>Superior mechanical property
>Minimum fully recovery temperature: 120°C
>Standard color: Black
III Techinal Data
Heat Shrinkable Sleeve
Heat Shrinkable Sleeve, Pipe Heat Shrinkable Sleeve, Pvc Heat Shrink Sleeve, Hot Shrink Sleeve, Corrosion Protection Tape
Jining Xunda Pipe Coating Materials Co.,Ltd , http://www.pipe-wrap.com