Strict construction can reduce regret
The reason for the cracking of the wall surface and decoration style is not only the improper handling of materials, but also an important reason is improper construction. If we can properly supervise the construction of workers in accordance with the normal process, and do all the steps, the probability of problems will be much smaller.
Woodworking construction: There is no fear of distortion
“Some decorators are often skeptical about the quality of the product itself when it comes to cracking the floor or tile. In fact, apart from the product itself, it is also related to the climate.†Guo Yougang introduced that in the past people generally believed that summer was not suitable for decoration. However, judging from the current renovation process, many wood products, such as doors, floors, and furniture, are dehydrated in the factory's thermostatic room and subjected to high-temperature compression treatment rather than the past on-site processing. Therefore, the decoration is not affected by the season. According to the strict master of woodworking, due to the high air humidity, the summer decoration has some special requirements for wood products, but as long as the strict implementation of the normal construction processes, processes, summer decoration can completely guarantee the quality. For example, in the general construction, the woodwork done in summer stipulates that some seams should be left, so that the wood is not afraid of being deformed by extrusion.
In addition, thermal expansion and contraction is a problem encountered in summer decoration. When laying floors, it is necessary to have a good sense of “dimensionâ€. When laying in the wet summer season, the gap between each floor strip should be arranged more closely to avoid winter. When the drying gap becomes larger and affect the appearance.
Clay tile construction: tiles to "eat" water
The decoration expert said: In summer, the temperature is high and the water evaporates too quickly. If the materials are not adapted, it is easy to crack, deform, and even fall off. Therefore, whether it is tile or floor leveling in the summer, not only use enough water, but also lock in moisture. For example, before the floor is leveled or tiled, the floor or wall can be properly wetted. After plastering the tiles, it is better to cover the floor with a layer of paperboard, and drench it with water, and then open the window for ventilation. If the temperature is high and it does not rain for a long time, we must spray water regularly on the plastered walls. The purpose is to make it slower and stick more firmly. Mei Li, the decoration engineering manager Wei Gong told reporters: In order to ensure full absorption of tiles, it is best to soak in advance, let it suck enough water and then remove, until the surface is dry, the second influent, while fishing, this When it comes to moisture-absorbing tiles, they can easily stick to the floor or wall without hollowing or falling off.
Putty construction: drying time is extended as much as possible
“In the interview, some owners reported that they had encountered putty and latex paint cracks. Everyone is often suspicious of the quality of putty and latex paint itself. In fact, cracks on the wall are not only the cause of putty and latex paint, but also It's related to the climate.†Master Puti Lin told reporters that the number of times and drying time should be paid attention to in summer when the wall is putty. First of all, in the project to do a good job of drying the base putty. It usually takes three to four passes to brush the paint. After each putty, the drying time should be as long as possible (usually 2 days to 3 days is appropriate), good ventilation, as much as possible to reduce indoor moisture. After the putty dries out, do it again. Don't follow the project schedule during the spring and winter period. If the putty does not dry out, it will be marked with putty or brush, and if too much water is locked in it, the wall will have “sweat†or even a large area of ​​cracking. In addition, putty can not be too thick, cellulose should be added to prevent uneven drying when the wall cracks.
Paint construction: thinning paint
Mr. Wu, a brand paint distributor in Liuzhou, told reporters that according to experience, painting is generally not done on rainy days. In particular, interior paints should pay more attention to stability and initial dry crack resistance. When it rains, it is necessary to dry the putty before painting the paint on the wall. If the putty quits and paints directly, it will cause cracking, blistering, and peeling of the wall in the future. In the case of wet and hot weather, the paint must first be thinned and the moisture large enough to ensure that the wall does not crack. At the same time can shorten the drying time of the primer, especially hot weather, only dry for half a day on the line, if the primer is allowed to hang too long, after the topcoat is brushed, it is prone to delamination, shelling, cracking and so on. “Because the rain has extended the duration of the project, some customers who are more impatient can also use the electric fan to blow the wall. This will not affect the quality of the decoration,†explains Mr. Wu.
Tile Laying Three Trees Lacquer Facade Decoration Paint Lacquer Interior Decor Window Tile Tile Tile Floor Tile
Heavy Duty Barrier Seal,Container Barrier Seal,Security Seal Sticker
WENZHOU GCSEAL CO. LTD. , http://www.sealsshipping.com