Plastic steel doors and windows are a new generation of doors and windows materials. Because of their advantages of high wind pressure resistance, good airtight watertightness, low air and rain penetration, low heat transfer coefficient, heat preservation, energy saving, sound insulation, and aging resistance, they are rapidly replacing Steel windows, aluminum windows.
Creation of doors and windows and sun room    Dream open windows and sun room
1, the structure of steel doors and windows. Plastic steel doors and windows are mainly made of hard PVC (PVC) plastic profiles, plus off-duty hardware. The profile is a porous cavity, and the main cavity has inner lining steel made of cold-rolled steel plates to increase the strength of the steel doors and windows. Profile wall thickness should be 2.5 mm or more.
2, the manufacture of plastic doors and windows. Plastic-steel doors and windows are generally manufactured at the factory using special steel cutting and welding equipment. They are semi-automated and automated. The quality can be guaranteed.
3, buy plastic doors and windows notice.
(1) Do not buy cheap steel doors and windows. Good plastic doors and windows have higher plastic quality, inner lining steel quality and hardware quality, and their service life can reach more than ten years. The use of low-cost steel doors and windows profiles, calcium carbonate content of more than 50%, additives containing lead salts, poor stability, and affect human health. The inner lining steel is a hot bar plate, the thickness is not enough, some even do not have inner lining steel, glass, hardware also have bad products. The service life is only two or three years.
(2) Pay attention to surface quality. The color of plastic profiles on the surface of doors and windows is blue-white or ivory white, clean, smooth and smooth. There are no scratches or bumps on the large surface, and there is no welding or fracture at the welding joint. The surface of the good quality steel doors and windows should have a protective film, and the user should tear off the protective film before use.
(3) Pay attention to glass and hardware. The glass should be smooth and dry. The glass and plastic profiles are not in direct contact and there is a sealing bead that closes the gap. The hardware is complete, the position is correct, the installation is firm, and the use is flexible.
>>> 20 Figure 45 flat sun married transitional housing Dwellings can also be converted into luxury homes
Doors, doors, windows, hardware, window glass, aluminum alloy glass doors
Sulfate, a compound consisting of sulfate ions (SO42 -) and other metal ions, are electrolytes and most of them are soluble in water.
Sulphate mineral is a kind of salt which is composed of metal element cation (including ammonium) and sulfate.
With high quality and first-Class service, we have successfully win the trust of customers all over the world, both small companies and big enterprice, and we shall continue the high quality products provided and improve our service to get the Win-win result.
Sodium Bisulfite,Sodium Bisulfite Solution,Sodium Bisulfite Anhydrous,Industrial Grade Sodium Bisulfite
Shijiazhuang Xinlongwei Chemical Co., Ltd. , http://www.xinlongwei-chem.com