Spring is the season for home improvement, but the southern part of spring has more rainy weather and humid air. This kind of wet weather inevitably has a certain impact on the renovation and construction at this time, especially when decoration materials are most likely to get wet. Once these problems occur, what are our first aid measures? Follow Xiaobian together to learn about the coup in building materials.
First, wet building materials first aid four wonderful recipe
It is not too late to make up for the so-called dead sheep. If home improvement building materials are inevitably affected by the spring weather, the following four small methods can solve your immediate needs:
Plaster control setting time
When dealing with gypsum-like material in the spring, because of the moisture, it is always difficult to control the shape of the molding, and the pressure resistance is also reduced. To improve this problem, the only way is to strictly control the condensation time, not as usual. Allow stirring time.
Nitro paint changed to polyester paint
In general, it is not advisable to carry out paint construction in humid air, especially in the South, difficult to do and easy to follow-up repair problems. In order to solve this problem, you can carefully look at the type of paint, as much as possible to use nitro Paint, not to choose polyester paint, etc., Nitro paint drying time will be faster.
Air conditioning absorbs moisture
On the one hand, the air in the spring is relatively humid. On the other hand, the construction site must always maintain a window-opening and ventilation environment. It is impossible to prevent moisture from entering the room. At this time, an air conditioner can be added to the decoration site to use the air-conditioning function. Absorb excess moisture from the air and avoid moisture penetration.
Drying of wood
Wet weather panels should be changed to flat, and immediately after entering the field, a layer of closed lacquer should be brushed to reduce the water absorption of the fine pores of the panels; the finished furniture can be provided with a moisture-proof protective film on the surface; In the case of ceilings, the use of wood keels is not recommended, and light steel keels are preferred.
Spring decoration knowledge building materials purchase building materials maintenance building materials knowledge
Shower Hinge is a general type of door hinge largely applied for Glass Door, Shower Room. JIANGYI has specialized in door hinges since 2000, our hinges could pass 24 hours neutral salt spraying test and acid spraying test. Also, we specially use V groove spindle to make sure glass doors accurately stop at 0°and 90°.
Specification
1. Material: Brass/ Stainless Steel/ Zinc. Alloy
2. Finish: Mirror / Matt / Antique/ Red copper / Gold / Rose gold
3. Suitable for glass door width: 800-1000mm
4. Suitable for glass thickness: 8-10mm, 6mm/ 12mm
5. Load weight: 45kgs
6. Automatically close at Approximately 25°
7. Must be tempered glass
Shower Hinge
Shower Hinge,Glass Hinges,Shower Door Hinges,Shower Screen Hinges
Jiangyi Industrial Co., Ltd , https://www.cnjyhardware.com