How to choose the interior door lock indoor door lock installation method

Indoor door locks are indispensable in every home renovation. No matter how simple you are to decorate, locks are never the target of Jane. The choice of locks in modern life is no longer just a matter of practicality, more emphasis on a sense of art, focus on quality to bring you a full range of quality. Then, the next small series for everyone to introduce how to choose the indoor door lock and indoor door installation method.

How to choose the interior door lock

1, first of all depends on the lock material, from good to bad followed by copper, stainless steel, zinc alloy, aluminum, iron, etc., copper lock is the best, buy stainless steel recommended to buy 304 material, buy aluminum to buy space aluminum. Do not buy iron locks, because the surface plating will rust off, less than a month lock is useless.

2, to see the safety, the most important performance in the lock cylinder, the key and the lock body, marbles less eye lock cylinder, it is easy to open, a skilled locksmith or thief, with a simple tool in a few seconds can be opened, We live in it. Security and privacy are not guaranteed. It is dangerous. At present, most domestic manufacturers produce such low-end products. Whether the rate of mutual opening of the cylinders is acceptable or not equal to each other refers to the percentage of times the locks are opened and the number of opening attempts. The national industry standard is <0.53%. If the cylinder is With a high rate of openness, hundreds of households in large communities can install door locks and their keys between neighbors may open to each other. The door is quite convenient but the safety factor is greatly reduced. We can distinguish from the ivory of the keys. The better, the less than 4 tooth lock cylinder can not be bought, the lock body to buy more insurance, the kind of double tongue or multi-tongue, to buy a single tongue to buy an explosive type, so that the thief is difficult to open, do not say The thief said that we could use an ID card and a bank card to open it if it was a single tongue, because it had only a latch tongue and no insurance, but the explosive single latch bolt had much higher security performance.

3. The smooth and beautiful appearance of the door lock is related to the face of the owner and can not be ignored. The following points can be noted when purchasing: 1. Whether the surface of the lock body is smooth or not has the defects that affect the appearance. 2. Is the key smooth and clean? The key can be inserted into the lock cylinder hole to open the door lock to see if it is smooth and flexible. The use of force is light and the sound is crisp and sweet. The fourth one depends on the degree of labor of the lock handle. The horizontal static pull is an important indicator of the lock firmness. The locks. Its handles must ensure that the switch is still millions of times without sagging. Many manufacturers can not do this, often see the switch to tens of thousands of times to hang up, but you want to test is an individual power!

Indoor door lock installation method

1. Pay special attention when installing spherical door locks. Only remove the end with insurance and install it. Do not remove the end with the key. It is advisable to read the instructions carefully before installation.

2, pay attention to the installation of the handle lock: If left open and right after the exchange, can not cause the handle to go up when the door is open, because the current market on the high-end handle locks have the function of swap around, buy handle lock There is no need to consider the direction of opening the door.

3. During the construction period, in order to protect the interior door locks, the exposed parts of the locks shall not be allowed to be wrapped with adhesive tape (or covered with textured paper). Otherwise, the protective film on the surface of the door lock will be damaged after the disassembly.

4. After the interior door lock is installed, when the door is painted, the door lock must be detached to prevent the exposed parts from being stained with paint. When the paint is removed, the protective film of the lock will be destroyed.

Editing summary: How to choose the installation method of indoor door lock and indoor door lock is introduced here, and we hope to help everyone. If you want to know more related information, you can pay attention to this website information.

Door locks Security door locks Bedroom door locks

Cow Magnet:


Due to the nature of cow's eating large portions of food without chewing, it leads to conditions known as Hardware Disease. This condition is caused when cows swallow a relatively heavy and sharp object such as nails, wire fencing, etc., which eventually finds its way to the rumen and the reticulum. The contractions from the reticulum can lead to irritation and inflammation, and this infection can potentially be life threatening to the cow.
To protect the cow's stomach from these harsh conditions, stock farmers insert a cow magnet into its stomach to attract these harmful objects.



Ferrite Cow Magnet:
1. Easy operate
2. Attract harmful objects to protect cow's stomach

3.Usage: to attract scrap iron or other metal particles in the cow's stomach., preventing hardware disease.

Specifications:

1.cow magnet is non-toxic
2.cow magnet is non-corrosive
3.cow magnet is best choice for dairy farmers

Cow Magnet

Cow Magnet,Alnico Cow Magnet,Neodymium Cow Magnet,Ferrite Magnets For Cow

Honesun Industrial Co.,Limited , https://www.chinamagnetise.com