There are many types of sanitary wares, and there are more things to be aware of during the renovation of the bathroom. Many people attribute the longevity and failure of sanitary ware to product quality problems. In fact, the installation and daily maintenance of the products are one of the reasons. Today, Xiaobian specially brings you the sanitary ware installation process highlights, and the decoration is not to be missed!
1. Toilet process
Check the ground drain pipe → align the nozzle → level the alignment → draw the mark → punch the hole → apply the putty → set the rubber pad → screw the nut, → mark the two sides of the water tank on the back side → punch → Insert the bolt → æ» â†’ → back to the tank to find the right side → turn the nut → install the water tank elbow → install the eight-character door → bend the mother light fork → insert the drift door and the eight-word door → tighten the nut.
2. The process of the washbasin
Insert the expansion bolts → æ» â†’ → the tube rack is hung up → put the washbasin on the rack to find the level → water connection: washbasin → straighten → water connection.
3. Bathtub process
Bathtub installation: → water installation → putty closed tight → water installation → flattening
4. Shower process
Cold and hot water nozzles are flattened with test tubes → measure the size of the short section → install on the nozzle → wash the copper inlet of the shower with lead oil, wrap → nut tighten → fix on the wall → upper copper tube is installed in the three-port → The wood screws are fixed to the wall.
5. The process of the bidet
The door cover and nut of the mixing switch and the hot and cold water door are leveled, → the water gate is installed → the nozzle core door is installed → the hot water door outlet nut is tightened → the nut on the mixing switch is tightened → three water door covers are installed → the magnetic basin is installed Good → When installing the nozzle → Install the water outlet → When installing the portable lever → Adjust the positioning.
Cutting mode: Laser cutting
Suit material: carbon steel, alloy steel, galvanized plate, stainless steel, copper plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet matal.tube stock.
1.Product describe
Fast cutting spead, high working efficiency and high stability, it is a high-tech equipment that set one of fiber laser technology, CNC technology and high-tech equipment.
2. Product features
Imported with original packaging servo motor and reducer, bilateral drive, high operating speed and high precision.
Can remote operation, convenient and efficient, save labor.
Imported cutting head, optical glass, focusing is convenient and cutting perfect.
Fiber transmission, no need to adjusted the optical circuits, focal spot is more smaller.
Adopted auto lubrication system, auto dual-temperature control syatem, convenient and efficient.
High precision grinding guide rail, gear and rack, precision class up to ±0.02mm.
3.Product parameters
|
Type |
TI-3015 |
|
Effective cutting width ( mm) |
1500 |
|
Effective cutting Length ( mm) |
3000 |
|
Circular tube diameter ( mm) |
10-150 |
|
Square tube size ( mm) |
10-150 |
|
Range of vertical stroke ( mm) |
0-200 |
|
Input power |
AC380V/50Hz;AC220V/50Hz |
|
Cutting thickness ( mm) |
0.3-15 |
|
Cutting speed ( mm) |
21000 (1000W/stainless δ1mm) |
|
Idle speed ( mm) |
100000 |
|
Maximum Acceleration (G) |
1.2 |
|
Position repeat accuracy ( mm) |
±0.05 |
|
Laser power (w) |
500-1500 |
|
Drive mode |
Precision rack bilateral drive |
|
Laser wavelength ( nm) |
1080 |
|
Cooling mode |
water-cooling |
|
Environmental temperature |
5-35℃ |
|
Cutting material |
Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet |
4. Cutting samples
Manganese Steel Plate Cutting Machine
Cnc Laser Cutter,Manganese Steel Plasma Cutting Machine,Manganese Steel Gantry Cutting Machine,Manganese Steel Plate Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com