Core Tip: This machine is made of PVC plastic. Do not force the collision to avoid rupture. Do not exceed the test standard temperature to avoid deformation due to overheating.
Let me introduce you below:
1. Power supply 220V single phase 15A
2. The space behind the machine is placed about 50cm away from the wall, leaving room for maintenance.
3. Before the external line of the machine is the 2.5mm2 power cord of the main power cord, please add a no-fuse switch or a doorknife switch (about 16-25A). The drain pipe can be drained with PVC1/2" hard pipe. It should be noted that the water pipe should be down. The exhaust pipe needs to be hard pipe PVC21/2" hard pipe, which is discharged to the outside. It must pay attention to the installation of the exhaust pipe, which can be paralleled by the machine. under.
4. The installation position of the machine, please avoid direct sunlight, so as not to affect the test conditions.
5. The installation position of the machine should be as close as possible to other electrical equipment, precision instruments or flammable materials to avoid danger.
6. This machine is made of PVC plastic. Please do not force it to avoid rupture. Do not exceed the test temperature to avoid deformation due to overheating.
Concerned about surprises
Label: Salt spray test chamber installation conditions and precautions
Previous: Installation requirements for vortex flowmeter Next: Energy-saving advantages of aluminum-clad wood doors and windows
Calcium Cyanamide,White Calcium Cyanamide,Granular Calcium Cyanamide,Calcium Cyanamide Fertilizer,Raw Materials Calcium Cyanamide
Beilite Chemical Co., Ltd. , https://www.dicyandiamideblt.com