Speaking of the tricks encountered in the process of floor-laying, most people will not care about it and think that it is a minor problem. Actually, if you do not pay attention to this aspect, you may well need more money. Because the floor area of ​​the loss is also very considerable, if you are not familiar with this aspect, then take a good look at this article, there will be a lot of information in the text to tell you the material waste caused by the process of flooring.
According to the actual situation in my family, I feel that they spend more time on materials and cause waste:
| Method one, commonly used accessories on-site cutting |
I don’t know if you noticed it or not. I noticed that when my family’s master arrived at my house and put down the floor, I immediately saw the floor and cut it into small strips. At the time, I was a little puzzled. This was dry. Well? Later, they learned that when they struck the floor, they struck the floor with two strips as cushions. After understanding this, I felt a bit uncomfortable. It should be said that this should be considered a common accessory for floor covering workers. How could it not be brought to the scene? For a good board, it is necessary to scrape several small strips.
Let's take a look, this is what the master took in the hand (Note: The picture is borrowed online, not my home...)
personal suggestion:
It is recommended that businesses can bring their own (if the board can not be used for as long, it can be completely cut from the last two scraps in the bag), so as to avoid wasting a user's home on a floor ... ...
If you are buying from a mall, then I suggest that before you know where to lay the floor, you can go to the decoration garbage station in the community to find the board, what color suit does not matter, because it is just a tool, run out to throw ...
Decoration catty floor purchase living room decoration room square meter decoration decoration home improvement door picture cloakroom picture study room picture cloakroom size
We have Germany's most advanced equipment[automated spindle type kiln",select high quality raw materials.
Special For Roller Kiln
Diameter:25-100mm,
Length:2000-5000mmAnnual output:500000 pcs
Ceramic Roller
Ceramic Roller,High Temperature Ceramic Rollers,Special Roller,Ceramic Guide Roller
QINGDAO SANJET NEW POWER MACHINERY CO., LTD. , http://www.sanjet.net