K Valuve 68-66 PVC Resin Sg5

Model NO.: PVC Resin SG5
Other Name: Polyvinyl Chloride Resin
Mf: [-CH2-Chcl-]N
Modle Number: Sg1 Sg3 Sg5 Sg6 Sg7 Sg8
Apparence: White Powder
Purity: 99.9%
Application: Plastic, Pipe, Door, Compounds
Sample: Free
Trademark: KL
Transport Package: 25kg/700kg Bag
Specification: PVC Resin SG5
Origin: China
HS Code: 39041090
Model NO.: PVC Resin SG5
Other Name: Polyvinyl Chloride Resin
Mf: [-CH2-Chcl-]N
Modle Number: Sg1 Sg3 Sg5 Sg6 Sg7 Sg8
Apparence: White Powder
Purity: 99.9%
Application: Plastic, Pipe, Door, Compounds
Sample: Free
Trademark: KL
Transport Package: 25kg/700kg Bag
Specification: PVC Resin SG5
Origin: China
HS Code: 39041090
K Valuve 68-66 PVC Resin Sg5

Product Description

1.Properties:

Name:PVC resin

Appearance: White powder

CAS NO:9002-86-2

Molecular Formula:(C2H3CL)n

PVC resin is the most widely Raw Material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.

The PVC Resins are polymerized by suspension process, their appearance being in white powder form. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.

 

Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.
K Valuve 68-66 PVC Resin Sg5

 

2.Specifications:

Tape:

SG1

SG2

SG3

SG4

SG5

SG6

SG7

SG8

K value

77-75

74-73

72-71

70-69

68-66

65-63

62-60

59-55

Viscosity, ml/g

156-144

143-136

135-127

126-119

118-107

106-96

95-87

86-73

Average polymerization

 

 

1350-1250

1250-1150

1100-1000

950-850

950-850

750-650

Number of impurity particle max

30

30

30

30

30

30

40

40

Volatiles content % max

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

Appearing density g/ml min

0.42

0.42

0.42

0.42

0.42

0.45

0.45

0.45

Residual after sieve 0.25mm mesh max

2.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

0.063mm min

90

90

90

90

90

90

90

90

Number of grain/400cm2 max

40

40

40

40

40

40

40

40

Plasticizer absorbency value of 100g resin

25

25

25

22

19

16

14

14

Whiteness % min

74

74

74

74

74

74

70

70

Residual chlorethylenecontent mg/kg max

5

5

5

5

5

5

5

5

Ethylidene chloride mg/kg max

150

150

150

150

150

150

150

150


3.Package:
25kg/bag, PP valve bag with PE liner.

K Valuve 68-66 PVC Resin Sg5
 

4.Application:

PVC resin - SG3 K-Value 72-71, Average degree of polymerization 1350-1250

PVC resin - SG4 K-Value 70-69, Average degree of polymerization 1250-1150  

PVC resin - SG5 K-Value 68-66, Average degree of polymerization 1100-1000   

PVC resin - SG6 K-Value 65-63,  Average degree of polymerization 950-850

PVC resin - SG7 K-Value 62-60, Average degree of polymerization 850-750  

PVC resin - SG8 K-Value 59-55,  Average degree of polymerization 750-650

 

SG-1 is used in producing high-grade electrical insulating material 
SG-2 is used in producing electrical insulating material, common soft products and film 
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products, 
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes 
SG-5 is used in producing transparent products section bar, hard tube and decorative materials 
SG-6 is used in producing clear foil, hard board and welding rod 
SG-7, SG-8 is used in producing clear foil, hard injection molding.


5. FAQ 

1)Q:Are you a factory or trading company?

A:We are a factory. 

2)Q:Where is your factory located? How can I visit there?

A:Our factory is located in Zhengzhou, Henan Province, China

you can fly to Zhengzhou Xinzheng International Airport .

All our clients, from home or abroad, are warmly welcome to visit us! 

3)Q:What is thepayment terms?

A: L/C ,T/T, D/P, D/A 

4)Q:How can I get some samples?

A: Kindly send us your address, we are honored to offer you samples. 

5)Q:How does your factory do regarding quality control?

A: Our factory can accept any third party inspecition.

Contact Person: Doris

 

K Valuve 68-66 PVC Resin Sg5

Product Description

1.Properties:

Name:PVC resin

Appearance: White powder

CAS NO:9002-86-2

Molecular Formula:(C2H3CL)n

PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.

The PVC Resins are polymerized by suspension process, their appearance being in white powder form. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.

 

Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.
K Valuve 68-66 PVC Resin Sg5

 

2.Specifications:

Tape:

SG1

SG2

SG3

SG4

SG5

SG6

SG7

SG8

K value

77-75

74-73

72-71

70-69

68-66

65-63

62-60

59-55

Viscosity, ml/g

156-144

143-136

135-127

126-119

118-107

106-96

95-87

86-73

Average polymerization

 

 

1350-1250

1250-1150

1100-1000

950-850

950-850

750-650

Number of impurity particle max

30

30

30

30

30

30

40

40

Volatiles content % max

0.40

0.40

0.40

0.40

0.40

0.40

0.40

0.40

Appearing density g/ml min

0.42

0.42

0.42

0.42

0.42

0.45

0.45

0.45

Residual after sieve 0.25mm mesh max

2.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

0.063mm min

90

90

90

90

90

90

90

90

Number of grain/400cm2 max

40

40

40

40

40

40

40

40

Plasticizer absorbency value of 100g resin

25

25

25

22

19

16

14

14

Whiteness % min

74

74

74

74

74

74

70

70

Residual chlorethylenecontent mg/kg max

5

5

5

5

5

5

5

5

Ethylidene chloride mg/kg max

150

150

150

150

150

150

150

150


3.Package:
25kg/bag, PP valve bag with PE liner.

K Valuve 68-66 PVC Resin Sg5
 

4.Application:

PVC resin - SG3 K-Value 72-71, Average degree of polymerization 1350-1250

PVC resin - SG4 K-Value 70-69, Average degree of polymerization 1250-1150  

PVC resin - SG5 K-Value 68-66, Average degree of polymerization 1100-1000   

PVC resin - SG6 K-Value 65-63,  Average degree of polymerization 950-850

PVC resin - SG7 K-Value 62-60, Average degree of polymerization 850-750  

PVC resin - SG8 K-Value 59-55,  Average degree of polymerization 750-650

 

SG-1 is used in producing high-grade electrical insulating material 
SG-2 is used in producing electrical insulating material, common soft products and film 
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products, 
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes 
SG-5 is used in producing transparent products section bar, hard tube and decorative materials 
SG-6 is used in producing clear foil, hard board and welding rod 
SG-7, SG-8 is used in producing clear foil, hard injection molding.


5. FAQ 

1)Q:Are you a factory or trading company?

A:We are a factory. 

2)Q:Where is your factory located? How can I visit there?

A:Our factory is located in Zhengzhou, Henan Province, China

you can fly to Zhengzhou Xinzheng International Airport .

All our clients, from home or abroad, are warmly welcome to visit us! 

3)Q:What is thepayment terms?

A: L/C ,T/T, D/P, D/A 

4)Q:How can I get some samples?

A: Kindly send us your address, we are honored to offer you samples. 

5)Q:How does your factory do regarding quality control?

A: Our factory can accept any third party inspecition.

Contact Person: Doris

 

Plant same with our body, which is not only need N P K,but also need some trace elements.  These Trace Element has been playing a very important role. We can supply every sigle trace element like EDTA-Cu , EDTA-Fe, EDTA-Mn , EDTA-Zn, Boron, Mo and so on. They can adjust the metabolism of plant. Different crops have different reqquirements about trace elemnt. Farmers need to learn how to control the content.

Trace Element

Trace Element,EDTA-Cu,EDTA-Fe,EDTA-Mn,EDTA-Zn

Hebei Monband Water Soluble Fertilizer Co., Ltd. , http://www.wsfertilizer.com