Dongguan Songshen Plastic Electronics Co., Ltd. was founded in 2001 and has since been focused on the manufacturing and sales of various electronic components, including chip resistors, chip capacitors, wirewound resistors, through-hole electrolytic capacitors, carbon film resistors, gold film resistors, power inductors, and chip inductors. Among these, chip inductors are widely used in electronic circuits. When current flows through a conductor, it creates a magnetic field around it. This magnetic field can induce an electromotive force (EMF) in the same conductor, known as self-induced EMF, which is a fundamental principle of electromagnetic induction. To enhance this effect, insulated wires are often wound into coils with multiple turns. Such a coil is referred to as an inductor.
Chip inductors have properties that contrast with those of capacitors. While capacitors block DC and allow AC to pass, inductors do the opposite—they allow DC to flow with minimal resistance while opposing AC signals. When an AC signal passes through an inductor, a self-induced EMF is generated across its terminals, opposing the applied voltage. As a result, the inductor exhibits higher impedance at higher frequencies. In practical applications, inductors are frequently used in conjunction with capacitors to create LC filters, LC oscillators, and other frequency-selective circuits. Additionally, inductors are essential components in chokes, transformers, and relays, playing a crucial role in power management and signal processing.
Dongguan Songshen Plastic Electronics Co., Ltd. continues to provide high-quality inductors and other electronic components, supporting a wide range of industries from consumer electronics to industrial automation. With years of experience and a commitment to innovation, the company remains a reliable partner for businesses seeking dependable and efficient electronic solutions.
Http://news.chinawj.com.cn Submission:
SMS/DS Sanitary Pipe Fitting Specification:
â–ª Standard:3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc
â–ª Material: Stainless Steel 304 (1.4301), Stainless Steel 316L(1.4404) etc.
▪ Size Range: 1/2″ to 12″ / DN15 ~ DN300
â–ª Connection Type: Welded, Tri-Clamped, Threaded
Surface Finish:
Mechanically polished and electropolished are available for our products.
Tube and Fittings: Ra0.4, Ra0.6, Ra0.8 or specified
Both outside and inner available.
Quality & Inspection:
â–ª PMI test to verify material grade
â–ª Dimension controlling during fabricating and finished
â–ª Visual and surface 100% examination before shipment
â–ª Packed in carton box firstly, then in wooden case
Stainless Steel SMS/DS Sanitary Pipe Fittings, SMS/DS Hygienic Fittings, SMS/DS food grade fittings,Material in SS304 & SS316L, Standard including 3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc,size from 1/2" to 12", used in Food, milk, beer, brewage, pharmacy, comestic, biopharmacy, etc.Connection Type have Welded, Tri-Clamped, Threaded ends. Welcome to buy SMS/DS sanitary pipe fittings, SMS/DS Hygienic Fittings, SMS/DS food grade fittings from us in wholesale price, if you have any questions or requests, pls feel free to contact us!
SMS/DS Sanitary Pipe Fitting Specification:
â–ª Standard:3A, DIN, SMS, BS, RTJ, ISO, IDF, DS, INCH, etc
â–ª Material: Stainless Steel 304 (1.4301), Stainless Steel 316L(1.4404) etc.
▪ Size Range: 1/2″ to 12″ / DN15 ~ DN300
â–ª Connection Type: Welded, Tri-Clamped, Threaded
Surface Finish:
Mechanically polished and electropolished are available for our products.
Tube and Fittings: Ra0.4, Ra0.6, Ra0.8 or specified
Both outside and inner available.
Quality & Inspection:
â–ª PMI test to verify material grade
â–ª Dimension controlling during fabricating and finished
â–ª Visual and surface 100% examination before shipment
â–ª Packed in carton box firstly, then in wooden case
SMS/DS Sanitary Pipe Fittings,SMS/DS Sanitary Fittings,SMS/DS Hygienic Fittings,SMS/DS Fittings,SMS Sanitary Fittings,SMS Fittings
Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com