Household independent gas alarms are now widely used in the family life, adding a safety guarantee for the use of gas for life. So how do you use the alarm correctly to make it more effective and protect it? Friends can learn about the following. First of all, let's analyze the common problems in the use of household independent gas alarms. 1. There is no detection, no sensitivity, no false alarm, no alarm. 3. The alarm device loses its function after being used for a period of time. 4. The service life is not long. Do not rule out the individual quality of the alarm, then the above doubts may be due to the quality of the alarm itself, and many times it is caused by improper use or installation location.
In order to avoid problems caused by improper use, pay attention to the following when installing and using gas alarms:
1, do not face oil fumes. Do not install it in a well-ventilated area or in a large air flow area and affect the detection effect.
2, it is best not to be covered by other objects. Cannot be installed next to a vibrating object such as a refrigerator or air conditioner.
3, do not spray paint around the combustible gas detector, spray a lot of irritating gases, such as pesticides, alcohol and so on. 4. When the green light is flashing (usually there is a warm-up lamp that is green, when it is flashing, it is in a warm-up state, and when it is on, it goes into normal operation). Jet inspection is not allowed.
5. It is forbidden to vibrate, drop or impact the combustible gas detector during the installation process, otherwise the combustible gas detector will fail. 6, do not install the alarm above the kitchen or gas appliances, cooking fumes and cooking fumes caused by the device will alarm frequent accelerated aging.
Home independent gas alarm installation location reference:
Gas alarms should be installed where the leaked gas is most likely to gather or must be on the road. The gas source is less than 3 meters, but it must be distinguished whether it is installed in a position away from the position or close to the ceiling. Gas and natural gas users: About 0.3 meters from the ceiling (Gas and natural gas are less dense than air, so the gas leaks up). Instead of using liquefied gas users: To be installed about 0.3 meters from the ground.
In order to avoid problems caused by improper use, pay attention to the following when installing and using gas alarms:
1, do not face oil fumes. Do not install it in a well-ventilated area or in a large air flow area and affect the detection effect.
2, it is best not to be covered by other objects. Cannot be installed next to a vibrating object such as a refrigerator or air conditioner.
3, do not spray paint around the combustible gas detector, spray a lot of irritating gases, such as pesticides, alcohol and so on. 4. When the green light is flashing (usually there is a warm-up lamp that is green, when it is flashing, it is in a warm-up state, and when it is on, it goes into normal operation). Jet inspection is not allowed.
5. It is forbidden to vibrate, drop or impact the combustible gas detector during the installation process, otherwise the combustible gas detector will fail. 6, do not install the alarm above the kitchen or gas appliances, cooking fumes and cooking fumes caused by the device will alarm frequent accelerated aging.
Home independent gas alarm installation location reference:
Gas alarms should be installed where the leaked gas is most likely to gather or must be on the road. The gas source is less than 3 meters, but it must be distinguished whether it is installed in a position away from the position or close to the ceiling. Gas and natural gas users: About 0.3 meters from the ceiling (Gas and natural gas are less dense than air, so the gas leaks up). Instead of using liquefied gas users: To be installed about 0.3 meters from the ground.
Twist bit usage
Suitable for deep hole drilling of cast steel, alloy and non-alloy steel, gray cast iron, forging cast iron and graphite surface treatment, oxidation blackening treatment.
Hss Drill Bits For Wood,High Speed Wood Drills,Highly Durable Taper Drill,Milled Bright Left Drills Bit
Changzhou Bomitools Co.,Ltd. , https://www.bomitools.com