[China Aluminum] People who know how to make aluminum extrusions know that it is not worthwhile to scrap the material when it is bent. It should not happen. It can be avoided! Then, how to reduce or avoid bending? Scrap it!
Extrusion and straightening: straightening is a very serious link caused by the profile, the straightening work must pay attention to the intensity of straightening. If the strength is too great, the profile may be deformed, closed, orange peel, etc., and the strength is too small. The resulting profile is not straightened, causing bending.
Squeeze frame: This section is also very important, after sawing out the fixed length, aluminum will be framed, this fashion frame worker should pay attention to: This material is an oversized or small material, is with pipe or plane The material pulled out from the die is generally not easy to cause bending when the material is loaded on both ends of the material and the tube, but the material pulled out of the small material and the planar die is likely to cause bending when the two ends are lifted. You should lift the frame from the two ends toward the center. However, even if some profiles do not work, such as louvers, windows, lids, etc., they must be placed on time-efficient profiles and lifted into frames.
Surface treatment: The billet is aged, the hardness is up to standard, and the profile is not so easily bent. However, when it is put on the shelf, it is necessary to pay attention to it. When both ends of the material are raised, try to avoid strong fluctuations from top to bottom. Strong fluctuations will also cause aging aluminum profiles. A certain amount of bending.
Euro Fence is a special design for fencing purpose. It is original from Europe and becomes very popular all over the world. It is ideal for private garden, parking lot, landscaping closure and so on. It is the perfect fencing products of easily installation, low cost and good appearance.
This design is featured at the crimped horizontal wire and reinforced selvedge at the top and bottom. It is considerate that our horizontal wire is properly crimped for the rain drop to fall easily. We have PVC coated type and hot dipped type available in our stock. We use galvanized inner wire for the PVC coated type for outdoor application. Dark Green (RAL 6005) is the common color.
|
Wire Diameter |
Mesh(Inch) |
Mesh (mm) |
|
|
2.0mm-3.5mm |
2" x 2" |
50mm x50mm |
|
|
|
2" x 3" |
50mm x 75mm |
|
|
|
2" X 4" |
50mm x 100mm |
|
|
Special specifications are available |
|
||
|
|
|||
Application: Euro Fence is used as fencing, decoration or protection for various facilities in industry, agriculture, infrastructure, transport, etc.
Euro Fence
Euro Fence,Galvanized Euro Fence,Euro Garden Fence,Holland Fence,Welded Euro Fence
Anping Enzar Metal Products Co.,Ltd. , https://www.enzarmetal.com