Bathroom waterproofing is a problem that everyone cares about. It is the focus of attention in the renovation of the bathroom. Recently, they have also received complaints about some waterproof work problems. Some decoration companies to defraud consumers of water-proofing can not do 100 percent, or shirk their responsibility. Here are some ways we can do a good job of waterproofing. 
Dinger Sanitary Wrigley Sanitary Wares In order to make the waterproof period longer in the future, the paint generally needs to be brushed 3 times. In order to allow the paint to fully dry out, it is not possible to choose to do it in a rainy or wet climate. The dry period of general one-component environment-friendly polyurethane coatings is about 3 to 4 days.
Including the one-component environmental protection polyurethane coating, the cement layer covering the coating, and the facing brick, the material consumption per square meter will generally not exceed 400 yuan. In this way, a bathroom of 5 square meters in size, re-waterproof about 2,000 yuan, bath and other bathroom facilities need to be re-arranged.
After the waterproof construction is completed, all sewers of the toilet shall be blocked and a “low wall†shall be built at the entrance of the bathroom for water injection test. The height of water injection shall be about 20cm. After 24 hours inspection, if there is no leakage around the bathroom wall and the ground, the waterproof quality of the bathroom is very good. Instead, find the leak and perform repairs.
The wall should also be waterproof. In order to achieve a better waterproof effect, the general bathroom wall should also be about 30cm high waterproof treatment to prevent stagnant water through the wall. The wall adjacent to the bathtub is also higher than the upper edge of the bathtub.
Links: "Perfect" bathroom with creative personality
Dinger Sanitary Wrigley Sanitary Wares In order to make the waterproof period longer in the future, the paint generally needs to be brushed 3 times. In order to allow the paint to fully dry out, it is not possible to choose to do it in a rainy or wet climate. The dry period of general one-component environment-friendly polyurethane coatings is about 3 to 4 days.
Including the one-component environmental protection polyurethane coating, the cement layer covering the coating, and the facing brick, the material consumption per square meter will generally not exceed 400 yuan. In this way, a bathroom of 5 square meters in size, re-waterproof about 2,000 yuan, bath and other bathroom facilities need to be re-arranged.
After the waterproof construction is completed, all sewers of the toilet shall be blocked and a “low wall†shall be built at the entrance of the bathroom for water injection test. The height of water injection shall be about 20cm. After 24 hours inspection, if there is no leakage around the bathroom wall and the ground, the waterproof quality of the bathroom is very good. Instead, find the leak and perform repairs.
The wall should also be waterproof. In order to achieve a better waterproof effect, the general bathroom wall should also be about 30cm high waterproof treatment to prevent stagnant water through the wall. The wall adjacent to the bathtub is also higher than the upper edge of the bathtub.
Links: "Perfect" bathroom with creative personality
Ground acceptance coating cement decoration decoration company bathroom waterproof bathroom door
Freestanding Bathtub Shower Panel Co., Ltd. , http://www.chbathtub.com