In a wireless monitoring system, a wireless remote control system or a data transmission system works in a point-to-face manner. The so-called point-to-face means that every monitoring system, whether it is a monitoring point or 100 monitoring points, wireless remote control transmitters will always only need one, and wireless remote control receivers will be based on the monitoring point of the bibliography, it can be 10 Or 100 units. A wireless remote transmitter can wirelessly control dozens or even hundreds of wireless remote receivers. Each surveillance point with a zoom Lens or pan/tilt head requires a wireless remote receiver. The control capacity of a wireless remote control system, that is, how many PTZs can be, the number of which does not depend on the wireless system, but is determined by a hard disk recorder, a matrix, or a dedicated control keyboard.
â— Wireless data transmission system:
------ Wireless, no delay, flexible transmission of PTZ camera control commands.
------Connect any brand of hard disk recorders, matrix controllers and dedicated keyboards.
------ RS232 or RS485 standard data interface, code rate: 1200/2400/4800/9600 optional. The wireless pan/tilt lens control system consists of a wireless data radio station, a computer, and a closed-circuit head. The system provides a transparent RS232 command channel. The wireless command transmitter is installed at one end of the monitoring center and is responsible for sending various control commands issued by the main control equipment; the wireless command receiver is installed near the front-end pan-tilt head and the camera, and is responsible for receiving commands of the wireless command transmitter; matrix, digital hard disk video recorder, etc. The main control device can wirelessly control any camera lens and various actions of the gimbal through the system.
â— Wireless data transmission system:
------ Wireless, no delay, flexible transmission of PTZ camera control commands.
------Connect any brand of hard disk recorders, matrix controllers and dedicated keyboards.
------ RS232 or RS485 standard data interface, code rate: 1200/2400/4800/9600 optional. The wireless pan/tilt lens control system consists of a wireless data radio station, a computer, and a closed-circuit head. The system provides a transparent RS232 command channel. The wireless command transmitter is installed at one end of the monitoring center and is responsible for sending various control commands issued by the main control equipment; the wireless command receiver is installed near the front-end pan-tilt head and the camera, and is responsible for receiving commands of the wireless command transmitter; matrix, digital hard disk video recorder, etc. The main control device can wirelessly control any camera lens and various actions of the gimbal through the system.
Flow Cells,Flow Cell Cuvettes,Fused Black Quartz Cuvettes,Micropore Flow Cells
Yixing Jingke Optical Instruments Co.,Ltd. , https://www.jkgxcn.com