The necessity of geothermal cleaning

The necessity of geothermal cleaning: The geothermal heating system mainly adopts a specially designed pipeline loop structure. At present, PE-RT and PEX pipes are mostly used as geothermal pipelines laid on the ground. The shape of the geothermal coils is complicated and the pipelines are longer due to the temperature of the water supply. The change will produce calcium and magnesium ions scaling on the inner wall of the pipeline for a long time. If it is not treated regularly, it will cause the temperature to drop, which will directly affect the cooling effect. Geothermal coil blockage has become a prominent problem that restricts the development of geothermal markets. Although geothermal heating paving units installed filters at the source to avoid pipeline fouling, the formation of rust and bio-fouling in the pipes still cannot stop the geothermal heating medium as water, and heating is based on the temperature in the absorption water. Reach heat and heat radiation to the environment. Minerals, calcium and magnesium ions are one of the components of the water, due to the change of the temperature of the return water will produce calcium and magnesium ions scale attached to the inner wall of the pipeline. In addition, biological slime, impurities, scale, rust, pollutants, and other impurities in the external network pipes of the central heating system enter into each household, and accumulating in the geothermal pipes also causes another major factor in fouling of the inner wall of the geothermal pipe: causing pipelines. Pollution becomes black, yellow, and green. The intervention of impurities and impurities will also increase the resistance of water. It is not enough to simply clean the filter. Therefore, if the geothermal piping is not cleaned periodically, it cannot be said. The advantages of energy saving, light will reduce the effectiveness of geothermal, the weight loss will cause pipeline emboli to lose heating, and even cause damage to the ground, remove or replace the geothermal pipe system, causing property losses to geothermal users. According to the relevant data, an average increase of 1 mm in thickness of 1 mm per year in the tube will reduce the room temperature by 6°C.
The Dalian Arctic Geothermal Cleaning Pipeline is a purely physical cleaning method for professional cleaning tools. It does not require any chemicals, and it does not damage the ground and does not damage or corrode pipes. The principle of geothermal cleaning equipment is to use compressed air as the power, and use the launcher to launch a 10-20% special projectile that is larger than the inner diameter of the pipeline, so that the projectile moves along the pipeline at high speed and fully rubs against the inner wall of the pipeline. The dry physical cleaning technology of the inner wall of the cleaning pipeline is achieved. It can solve the long-term accumulation of rust, calcium and magnesium ion scales, biological slime and other residual impurities in geothermal pipes and solve the problem of pipeline embolism.
Arctic Geothermal Cleaning Equipment Technology Advantages: Safe, fast, efficient, simple, time-saving, environmentally friendly, energy-saving; 90°, T-shaped, circular, U-shaped, serpentine, etc. complex multi-bend pipelines; thorough cleaning effect, pipeline There is no residue inside; One minute can be cleaned more than 200 meters, effectively clean up long-term accumulation of rust, mud, residue and other impurities in the heating coil; Physical cleaning, without any chemical reagents and water. It does not damage or corrode the inner wall of the pipeline and prolongs the service life of the geothermal coil; it does not need to dismantle the ground and does not affect the effect of decoration and avoid the loss of user's property.
In addition, the Dalian Arctic geothermal physical cleaning equipment can also solve the winter home without heating, need to prevent the occurrence of cracks in the floor heating pipe, it can make a drop of water in the floor heating pipe.
Experts recommend: The newly installed geothermal users, the first year of cleaning using water to clean the geothermal pipeline, cleaning the filter can; after each year using professional geothermal cleaning, maintenance and maintenance of the pipeline.
Don't forget to recommend this to friends posted on QQ/MSN (Jiangsu Construction Team, Xi'an 20 years experience in construction, consulting Q1057545818)

Entrance decoration restaurant decoration heating decoration design

Compression Spring

Compression Spring (compression spring) is a helical spring which is subjected to pressure. It is usually made of a circular section of material, and is also rolled with rectangular and multi-ply steel. Springs are usually of equal pitch, cOMPRESSION SPRING SHAPE: cylindrical, conical, CONVEX and concave in the middle and a small number of non-circular, compression spring between the circle and the circle of a certain gap, when subjected to external load spring shrinkage deformation, storage deformation energy.

The compression spring (compression spring) is a spiral spring which is subjected to pressure. It is usually made of a circular cross-section of material, and is also made of rectangular and multi-ply steel, the shape of compression spring is cylindrical, conic, convex and Concave, and a few non-circular. There is a certain gap between the circle and the circle of compression spring, when subjected to external load, the spring shrinks and deforms, storage of deformation energy. Compression spring introduction to compression spring introduction to compression spring characteristics of helical spring subjected to compression to external pressure provides resistance to external pressure application of household appliances to power equipment spring pressure spring compression spring parameter compression spring specification compression spring selection compression spring specification parameter compression spring design compression spring fixed mode compression spring design outline compression spring (compression spring) is a helical spring subjected to compression, most of the materials used are circular in cross-section, and some are rolled in rectangular or multi-ply steel. The springs are generally of equal pitch. The shapes of compression springs are: cylindrical, conical, medium convex and medium concave, and a few non-circular, etc. , there is a certain gap between the circle and the circle of the compression spring. When the spring is subjected to external load, the spring shrinks and deforms, and the deformation energy is stored. Compression Springs provide resistance to external pressure. Compression springs are generally metal wires with equal pitch winding and a fixed wire diameter. Compression Springs use multiple open coils to provide resistance against external forces, such as the weight of the wheel or the weight of the body on the mattress. That is, they push back against external pressure. Compression Springs are generally metal wires with equal pitch winding and a fixed wire diameter. In addition, there are conic compression springs, or conic and linear combination of springs. Compression Springs can be used to resist pressure and/or store energy, depending on the application area. Round wire is the most commonly used compression spring, but there are square, rectangular and special shapes of wire manufacturing compression spring. Wire Springs with compression springs are used for everything from home appliances to power equipment, motors, etc. because they are the desired type of spring. By the load acting on them or their ends being compressed, the compression spring is compressed by the design of the wire in an attempt to return the spring to its original shape so that the load is pushed back. Main application: medical respiratory equipment, medical mobile equipment, hand tools, home care equipment, shock absorption, engine valve spring. Production Design 1. Look at the actual product requirements to choose the spring material. 2. According to product requirements, determine the internal and external diameter of the spring, the number of effective turns, and the value range of wire diameter. 3. The relevant parameters are substituted into the design parameter formula.

Metric Compression Springs,Iso Compression Springs,Heavy Duty Compression Springs,Custom Compression Springs

Nantong Safe Yawl Import &Export Co.,Ltd , https://www.ntsyspring.com