On the 7th, a total of 9 major steel mills in the country issued price adjustment information. The number of price-adjusting steel mills decreased sharply from the previous day, prices continued to fall, and individual prices rose. Adjustments ranged from 200 yuan/tonne to 10 yuan/tonne/tonne. . Among them, the decline in the ex-factory price of construction steel products has significantly contracted, and the decline in plate prices has increased.
Among them, five of the above-mentioned steel mills adjusted the ex-factory price of construction steel products, and the price fell more than once. The price range decreased from RMB 37/tonne to RMB 10/tonne, which was a significant contraction from the previous day. At the same time, three of the above-mentioned steel mills adjusted the ex-factory prices of sheet metal products, and the prices continued to fall, falling by 50-200 yuan/ton, with a significant increase. In addition, there are two steel mills to adjust the ex-factory price of profile products, prices fell, the range of 20-60 yuan / ton from the construction steel point of view, this time the price adjustment of steel mills are mainly concentrated in East China, South, South China, North China Northwest, northeast and other places. Concretely speaking, the ex-factory prices of construction steels of major steel mills in the above regions were mainly adjusted downwards, rising individually, by 10-30 yuan per ton, up by 10 yuan per ton; among them, Anyang Steel in South-Central China raised its Φ6.5mmQ235 high line. 10 yuan/ton.
Among the major varieties of building materials, there are a large number of steel mills with Φ6.5mmQ235 high-line price adjustment, and the others are less, but the prices are mainly falling. Among them, the Φ6.5mmQ235 high-line ex-factory price reduction in the range of 10-37 yuan / ton, the increase rate of 10 yuan / ton; HRB335Φ20mm rebar factory price reduction in the range of 20-32 yuan / ton; HRB400 plate screw Φ8-10 ex-factory price The downward adjustment is at RMB 20/t.
As for sheet materials, there were three steel mills yesterday that adjusted the ex-factory price of sheet products and the price continued to decline. Among them, in the East China New Steel, the price of its Q23520mm Puzhong Plate and SS4.75mm general-purpose plate was lowered by RMB 200/t and RMB 150/t respectively; the price of the Q23520mm Puzhong Plate was lowered by RMB 90/t The Northwestern region's Xining in Jiuquan lowered the price of its Q23520mm Puzhong board by 50 yuan/ton.
In addition, the Anyang Iron and Steel Company in Central and South China reduced the ex-factory price of its 5# angle steel and 16# channel steel by RMB 60/t; Tianjin Jiangtian in North China lowered the ex-factory price of its 16# channel steel and 25# beam steel by RMB 30/t and RMB 20 respectively. /Ton.
Affected by the slowdown in the decline in the ex-factory prices of the mainstream steel products, the confidence in the spot market has recovered. At the same time, Spiral rebounded slightly for two days in a row. It has some support for the market in the short term. However, the current market turnover remains depressed and the spot market performance remains unchanged. Weak.
In respect of building materials, yesterday's date spiral rebounded slightly, and the spot market has seen some improvement. Data show that on the 7th, the average price of HRB40020MM rebar in 25 major national markets fell by 12 yuan/ton from the previous day, and the decline slowed down. Among them, Shanghai fell; Beijing and Guangzhou remained steady; on the 7th, the average price of the 6.5mm high line in the 24 major markets across the country remained unchanged from the previous day, and the mainstream markets were all stabilized.
As regards sheet, the market remained flat and the overall decline was still modest. According to the data, the average price of 20mm plate in the 23 major markets nationwide fell by RMB 8/t on the 7th, which was a significant contraction from the previous day. Among them, the mainstream market remained stable and Tianjin fell by 30 yuan/ton. On the 7th, the average price of Q235B 4.75mm hot coils in 24 major markets across the country fell by 5 yuan/ton from the previous day, with the same decline as the previous day, and the mainstream market remained stable.
The profile market continued its downward trend, but the decline was modest. According to the data, the average prices of 50*5 angle steel, 16# channel steel and 25# I-beam in some major national markets fell by RMB 9,6, and 3/ton respectively from the previous day, which was a slight contraction from the previous day. Shanghai, Beijing and Guangzhou all remained stable, with Tianjin falling by RMB 30/t.
According to the data of China Steel Association, the average daily output of crude steel in the country in July was 1.9494 million tons, which was 2.2% lower than that in mid-July. Although the output of crude steel has declined, but the rate is relatively limited, and the current market transactions are still not satisfactory, the market is still not optimistic about the market outlook is expected, the short-term steel factory prices are expected to continue to fall mainly.
Among them, five of the above-mentioned steel mills adjusted the ex-factory price of construction steel products, and the price fell more than once. The price range decreased from RMB 37/tonne to RMB 10/tonne, which was a significant contraction from the previous day. At the same time, three of the above-mentioned steel mills adjusted the ex-factory prices of sheet metal products, and the prices continued to fall, falling by 50-200 yuan/ton, with a significant increase. In addition, there are two steel mills to adjust the ex-factory price of profile products, prices fell, the range of 20-60 yuan / ton from the construction steel point of view, this time the price adjustment of steel mills are mainly concentrated in East China, South, South China, North China Northwest, northeast and other places. Concretely speaking, the ex-factory prices of construction steels of major steel mills in the above regions were mainly adjusted downwards, rising individually, by 10-30 yuan per ton, up by 10 yuan per ton; among them, Anyang Steel in South-Central China raised its Φ6.5mmQ235 high line. 10 yuan/ton.
Among the major varieties of building materials, there are a large number of steel mills with Φ6.5mmQ235 high-line price adjustment, and the others are less, but the prices are mainly falling. Among them, the Φ6.5mmQ235 high-line ex-factory price reduction in the range of 10-37 yuan / ton, the increase rate of 10 yuan / ton; HRB335Φ20mm rebar factory price reduction in the range of 20-32 yuan / ton; HRB400 plate screw Φ8-10 ex-factory price The downward adjustment is at RMB 20/t.
As for sheet materials, there were three steel mills yesterday that adjusted the ex-factory price of sheet products and the price continued to decline. Among them, in the East China New Steel, the price of its Q23520mm Puzhong Plate and SS4.75mm general-purpose plate was lowered by RMB 200/t and RMB 150/t respectively; the price of the Q23520mm Puzhong Plate was lowered by RMB 90/t The Northwestern region's Xining in Jiuquan lowered the price of its Q23520mm Puzhong board by 50 yuan/ton.
In addition, the Anyang Iron and Steel Company in Central and South China reduced the ex-factory price of its 5# angle steel and 16# channel steel by RMB 60/t; Tianjin Jiangtian in North China lowered the ex-factory price of its 16# channel steel and 25# beam steel by RMB 30/t and RMB 20 respectively. /Ton.
Affected by the slowdown in the decline in the ex-factory prices of the mainstream steel products, the confidence in the spot market has recovered. At the same time, Spiral rebounded slightly for two days in a row. It has some support for the market in the short term. However, the current market turnover remains depressed and the spot market performance remains unchanged. Weak.
In respect of building materials, yesterday's date spiral rebounded slightly, and the spot market has seen some improvement. Data show that on the 7th, the average price of HRB40020MM rebar in 25 major national markets fell by 12 yuan/ton from the previous day, and the decline slowed down. Among them, Shanghai fell; Beijing and Guangzhou remained steady; on the 7th, the average price of the 6.5mm high line in the 24 major markets across the country remained unchanged from the previous day, and the mainstream markets were all stabilized.
As regards sheet, the market remained flat and the overall decline was still modest. According to the data, the average price of 20mm plate in the 23 major markets nationwide fell by RMB 8/t on the 7th, which was a significant contraction from the previous day. Among them, the mainstream market remained stable and Tianjin fell by 30 yuan/ton. On the 7th, the average price of Q235B 4.75mm hot coils in 24 major markets across the country fell by 5 yuan/ton from the previous day, with the same decline as the previous day, and the mainstream market remained stable.
The profile market continued its downward trend, but the decline was modest. According to the data, the average prices of 50*5 angle steel, 16# channel steel and 25# I-beam in some major national markets fell by RMB 9,6, and 3/ton respectively from the previous day, which was a slight contraction from the previous day. Shanghai, Beijing and Guangzhou all remained stable, with Tianjin falling by RMB 30/t.
According to the data of China Steel Association, the average daily output of crude steel in the country in July was 1.9494 million tons, which was 2.2% lower than that in mid-July. Although the output of crude steel has declined, but the rate is relatively limited, and the current market transactions are still not satisfactory, the market is still not optimistic about the market outlook is expected, the short-term steel factory prices are expected to continue to fall mainly.
We can thank Aluminium for the changing image of modern cities and towns: the clarity of lines, the feverish desire to grow skyward, the beauty, functionality and environmental compatibility of present-day megalopolises. The glass faces of office skyscrapers are supported by lightweight and sturdy Aluminium frames. Entertainment, trade and exhibition centres literally rest on Aluminium frameworks. Stadiums, pools and other sports facilities are also built using Aluminium structures. This metal became one of the most popular materials among builders, architects and designers for the following reason.
Typical alloy: 5182, 5083, 6016, 6011, 6N12, 6014, 6181A, 6009, 6005A, 6061, 6082
Product character: good weld ability, good formability, superb bake hardening ability
Product Certificate:
Aluminium For Construction
Aluminium For Construction,Aluminium Plate For Construction,Aluminium Wall Plate,Aluminium Plate For Building
La Ya Aluminium products Co.,Ltd. , http://www.layametal.com