However, in the selection of plants, please use broad-leaved green plants as much as possible. Other colors or plants with small leaves or even vines will not only prevent you from catching up with bad magnetic fields. When you use the wrong ones, they will have opposite effects.
The choice of the screen, the first heavy material; the best is the use of wooden screens, including bamboo screens and paper screens, are wooden screens. Plastic and metal screen effects are more!
In addition, the screen height should not be too high, it is best not to exceed the height when the average person stands; otherwise, too high screen center of gravity is unstable, but it is easy to give people oppressive, virtually causing the user's psychological burden.
Plants and screens can be used in the following situations:
(1) If you have a toilet in front of or just next to your seat, you can place some large-leafed broad-leaved pots between the seat and the toilet. It can suck out radon from the toilet (like air purification). The function of the machine) and second, it can block the bad magnetic field; however, this plant that specializes in sucking helium gas is better to change it once a few months (just like the filter that regularly cleans the air-conditioner); otherwise, it also needs Every few months, let it ventilate outside (photosynthesis) so that it will not make the plants more and more dirty. It will no longer be a clean gas, but it will make you suffer.
(2) Use screens to separate the officials from each other. Regardless of whether you are an office worker or a senior executive, the seats are facing the owner's room. It is best to use large-scale broad-leaved pots to block the middle of the room. It is not appropriate to use screens. Otherwise, your relationship with your boss will be completely isolated by the screen.
(3) When someone in front of the seat is facing someone, this is a person-to-person rush. It's best to place small potted plants or some paper files between the two. Remember! Never sharpen or metal Something else, and the other side's impact will be stronger, and each other's magnetic field interference will be heavier.
(4) The seats are just flushed down the corridor. A large-leaved broad-leaved potted plant can be placed at the front of the desk to block the suffocation from the walkway. However, the height of the potted plants should not be too high or too low; almost people can block when they are sitting. You can turn off the line of sight.
(5) When there are large appliances in front of or behind the seat, large broad-leaved potted plants can be used in the middle; however, these plants for keeping out of helium gas should be replaced every three months or outdoors (balconies). ) Let the plants perform photosynthesis for a full day, and ventilate them (discharge helium). Otherwise, if you block the plants for a long time, like air-conditioning filters get dirty, the longer you put them, the more you can't stop them. On the contrary, the plants themselves will become a source of helium. At this time, your seat will be too frustrating. .
(6) The front of the seat happens to be the line or entrance of the entire office. A row of broad-leaved plants can be placed to block the suffocating traffic.
(7) When there are trash cans or garbage dumps beside the seats, the effect of using large green potted plants to isolate bad gas fields is better than using screens; but remember, instead of putting a plant in the way, you can skip the trash can The cleanliness; usually keep the trash or garbage area clean, which is good for the plants and themselves. After all, plants help you stop phlegm and blood stasis. They are just a kind of purification of the gas field, and they can't block all the helium and helium gas. Therefore, it is possible to reduce the undesired energy of helium. Please reduce it as much as possible. These barrier plants, like the filters of air conditioners, should be replaced at intervals or with air outside.
Renovation Feng Shui home design home Feng Shui boss room electrical appliances toilet door
Sintered Ferrite Magnet, hard ferrite, hard ferrite magnet is also called Ceramic Magnets.
Sintered ferrite magnets are available in isotropic magnet and anisotropic magnets. The magnetic properties of isotropic ferrite are low. Since they have nearly the same magnetic properties in all directions, so isotropic ferrite magnets can be magnetized in many different directions or in multi-poles. Anisotropic ferrite magnets have better magnetic properties compare with isotropic ferrite magnets. However this type of magnets can only be magnetized along a preferred direction.
Permanent ferrite magnets are made of hard ferrites, which have a high coercivity and high remanence after magnetization. Iron oxide and barium or strontium carbonate are used in manufacturing of hard ferrite magnets. The high coercivity means the materials are very resistant to becoming demagnetized, an essential characteristic for a permanent magnet. They also have high magnetic permeability. These so-called ceramic magnets are cheap, and are widely used in household products such as refrigerator magnets. The maximum magnetic field B is about 0.35 tesla and the magnetic field strength H is about 30 to 160 kiloampere turns per meter (400 to 2000 oersteds). The density of ferrite magnets is about 5 g/cm3.
The most common hard ferrites are:
Strontium ferrite, SrFe12O19 (SrO·6Fe2O3), used in small electric motors, micro-wave devices, recording media, magneto-optic media, telecommunication and electronic industry.
Barium ferrite, BaFe12O19 (BaO·6Fe2O3), a common material for permanent magnet applications. Barium ferrites are robust ceramics that are generally stable to moisture and corrosion-resistant. They are used in e.g. loudspeaker magnets and as a medium for magnetic recording, e.g. on magnetic stripe cards.
Why choose Ferrite Magnet?
1. Low cost and low price.
The raw material cost is very cheap and manufacturing process is simple. So the price if it is very low.
2. Nice temperature stability
Ferrite magnets can be used in the working temperature from -40℃ to 200℃.
3. Well prevent corrosion
The raw material of sintered ferrite magnet is oxide, so ferrite magnets will not be rusted under severe environment nor affected by many chemicals.
Ferrite Magnet
Ferrite Magnet,Block Ferrite Magnet,Round Ferrite Magnet,Hard Sintered Disc Ferrite Magnet
Jinyu Magnet (Ningbo) Co., Ltd. , http://www.magnetbonwin.com