SBLW automatic negative pressure steady flow water supply equipment product operating conditions and installation instructions

SBLW automatic non-negative pressure steady flow water supply equipment consists of frequency control cabinet, steady flow tank, water pump unit, instrument, valve pipeline unit and so on, suitable for water pipe network, need to increase water pressure, constant Flow of water supply system. Now to introduce the SBLW automatic negative pressure steady flow of water supply equipment, operating conditions and installation instructions. SBLW automatic negative pressure steady flow water supply equipment, SBLW automatic negative pressure steady flow water supply equipment Product operating conditions 1, ambient temperature: 5-40 ℃ 2, air relative humidity: ≤ 85% (20 ± 5 ℃) 3, medium temperature: 4-70 ℃ 4, the supply voltage: 380V (± 5%, -10%) Second, SBLW automatic negative pressure steady flow water equipment product installation instructions 1, the installation of pipe weight should not be subjected to Pump, otherwise easy to damage the pump; 2, the installation must be tightened anchor bolts, and each interval of time should check the pump to prevent loosening, so as to avoid the pump start violent vibration and affect the performance of the pump; 3, before installing the pump should Carefully check the runner has no effect on the operation of the pump hard material (such as stones, iron sand, etc.), so as not to damage the flow of water pump running parts; 4, in order to facilitate the maintenance and use of safety, Only a valve and a pressure gauge installed near the pump outlet. For high lift pumps, to prevent water hammer, a check valve should also be installed in front of the outlet gate valve to prevent downtime or sudden power loss to prevent backflow of media to ensure Pump in the best conditions shipped Line, increase the service life of the pump; 5, the pump is used for a suction occasion, should be equipped with a foot valve, and the inlet pipe should not have too many detours, while not leaking, leakage phenomenon, so as not to affect the pump suction performance ; 6, in order not to make impurities into the pump to block the flow channel affect performance, should be installed in front of the pump inlet filter; 7, before installing the rotor pump rotor components, there should be no friction sound or stuck phenomenon, Pump disassembled to check the reason. Further Reading: pump valve pipe fittings Exhibition Water Expo Xiamen exhibition of marine equipment Internet + Forum Yiwu Fair 2016 exhibition mold top ten brands of the Internet information industry (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)

5mm Red Through-Hole LED

5mm Red Through-hole LED(DIP LED) manufacturer from China.

5mm Through-hole LED, we supply 5mm red LED with water clear lens, 5mm red LED with diffused lens, 5mm red LED with red clear lens and 5mm red LED with red diffused lens. We also supply 6mm red LED with water clear lens, 6mm red LED with red clear lens and 6mm red LED with red diffused lens, and the shape of lens can be red 5mm round LED Blub, red 5mm flat top LED Blub, red 5mm bullet top LED Blub, red 5mm short top LED Blub, 5mm round LED without flange(fringe).

5mm Red Through-hole LED widely used for Red sign, display LED, indicator LED, die hole LED and 5mm round red with lamp holder because of the high brightness and the small size.

For the pin of 5mm red through-hole LED, we also have a lots of choice on it. For example: 5mm Red Through-hole LED flat pin, 5mm Red Through-hole LED curved pin, 5mm Red Through-hole LED braided pin ect.

For the bringhtness of 5mm red through-hole LED, we have three level: common bright 5mm red through-hole LED, super bright 5mm red through-hole LED and ultra bright 5mm red through-hole LED.

For the angle of 5mm red through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.

For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.

All of our product are meet with Reach, CE, RoSH, SGS, EN62471 standards and have 5 years warranty.

5Mm Red Through-Hole LED,5Mm Through-Hole LED Oval Red,5Mm 12V Through-Hole LED Red,Round Through-Hole 5Mm LED Red

Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com