The function of the bathroom in the decoration cannot be related to the water, so the bathroom is not an important indicator of whether the bathroom is good or not. To achieve the standard of waterproofing, the construction process is very important. The following small series to everyone to explain how to do waterproof and waterproof bathroom details.
How to make the bathroom waterproof - construction process:
1, first brush waterproof coating again. Before the construction, the site should be cleaned and not allowed to be wet. The waterproof coating should be applied completely, without any omissions. It must be firmly bonded to the grass roots, free of cracks, bubbles and no shedding. The brushing height is the same and the thickness must meet the product requirements. 
2. Brush the waterproof paint again. The second brush coating must be separated by time, depending on the coating time. The interval is too short and the effect of waterproofing will be greatly reduced.
3, brush protective layer. When it is feared that the waterproof layer will be damaged during construction, a protective layer must be applied to the surface of the waterproof paint. The protective layer must completely cover the waterproof layer without any omission. It has a strong bond with the grass roots, no cracks, no bubbles, and no shedding. 
4, closed water test. When closing the water test, the horizontal line must not be lower than 2 cm above the ground, and it should be kept for at least one day and observed for leaks. If there is any leakage, you need to redo it. Do not neglect it.
How to make waterproof bathroom - waterproof details:
1, before waterproof construction, the surface must be cleaned, no dust, otherwise it will affect the paint adhesion debris, an important step to do a good deal with the base of the wall, while ensuring that the surface is solid, no peeling off the powder, from the drum phenomenon . 
2. The dust on the ground should be cleaned, and the agglomeration and loosening of the base layer should be removed. The voids left after the transformation should be treated specially. The yin and yang corners should be rounded (or V-shaped). And you must first level the surface with cement mortar, and then do waterproof treatment. This will prevent leakage of the waterproof coating due to uneven thickness.
3. Every corner must be brushed in place, because the bathroom is where the water is used to deal with, and all kinds of pipelines are needed. It is necessary to pay attention to whether the joint between the pipeline and the ground is out of shape. The leakage of the general bathroom wall is due to the fact that there is no uniform application of waterproof material between the pipe and the wall. 
4, the waterproof coating on the wall should also be painted higher, or else the accumulation of water penetrating the wall is easy to destroy the wall. If the bathroom surface is a light wall, the entire wall should be painted with waterproof paint.
Editor's summary: The above is about the bathroom how to waterproof and bathroom waterproof details of the introduction, I hope Xiaobian share can help everyone. For more information, you can follow this site information.
How to make waterproof bathroom
Baoji zhipu non-ferrous metal processing co., LTD., is the best of the domestic molybdenum processing enterprises, according to the customer's requirement to customize the production of various specifications of the Molybdenum Wire, the company adopts the is the best quality raw materials, the domestic first-class production technology, the top production equipment
Molybdenum Wire
Molybdenum Wire,Good Stability Molybdenum Wire,High Purity Molybdenum Wire,Durable Molybdenum Wire
Baoji Zhipu Non-Ferrous Metals Processing Co., Ltd. , http://www.czpmow.com