Home lighting maintenance tips

In home decoration, many owners are concerned about the cost of renovation. Therefore, before the renovation, we must plan well, only good planning can reduce the cost. The undecorated living room in the home is like a canvas, and the decoration decoration is like a painting process. The lighting is the finishing touch on this home picture.

However, if you do not get the cleaning and maintenance you deserve, the high-end lamps will soon be dull. As with other furniture, the lamps also need regular cleaning and maintenance to maintain the brightness of the lamps and extend the life of the lamps. The lampshade is dimly lit by dust, and if not treated in time, it reduces the brightness by about 30% on average every year. Therefore, it is especially important to clean the lampshade and the lamp or bulb regularly.

First, see the instructions

After buying a Chinese table lamp or a European-style table lamp, don't be busy installing it. You should carefully look at the lamp's mark and read the installation and operation manual, and then install and use the lamp according to the instructions. Otherwise, danger may occur.

Second, problems occur in time to replace

According to the light source parameters provided by the sign, replace the aging lamp in time, and find that the two ends of the lamp are red, the lamp is black or there is a black shadow, and the lamp is not bright, the lamp should be replaced in time to prevent the ballast from burning out. Waiting for insecurity.

Third, do not change the structure of the luminaire

During cleaning and maintenance, care should be taken not to change the structure of the luminaire, and do not replace the components of the luminaire. After the cleaning and maintenance, the luminaire should be decorated as it is, and the components of the luminaire should not be missed or misplaced.

Fourth, do not switch frequently

When using the luminaire, try not to switch frequently, because the current through the filament is higher than the current during normal operation, so that the filament temperature rises sharply and accelerates sublimation, which will greatly reduce its service life. Reduce the switch of the luminaire.

Fifth, correct maintenance

The luminaires must be intensified during use to extend their service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; the lamp installed in the toilet and bathroom must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to anti-smoke, because the accumulation of grease stains affects the brightness of the lamp; the light-colored lampshade has good transparency, but it is easy to be dusted, so it should be diligently wiped to avoid affecting the penetration of light; If it is non-metallic, wipe it with a damp cloth to avoid dust accumulation and affect the lighting effect.

Moisture can cause rust and paint to fall off, and shorten the life of the luminaire. Therefore, moisture protection is the key to lighting maintenance, especially the bathroom, bathroom lamps and kitchen stove lights, should be installed with moisture-proof lampshade to prevent moisture intrusion, to avoid rust damage or leakage short circuit.

It is best not to wash the lamps with water. Just wipe them with a dry cloth and wipe them with water. If you accidentally touch the water, wipe them off as much as possible. Do not wipe them with a damp cloth immediately after turning on the lights.

2mp ip camera has a powerful 2MP CMOS sensor that is able to provide realtime 1080p video. This camera is a must have for any IP camera system.

The resolution of IP cameras is measured in Megapixels and they record in HD, we can choose fixed lens, varifocal lens or motorised lens. The IP Camera can be connected with power or NVR through POE. If needed, use POE switch to power your cameras at convenient locations.

Camera
Image Sensor:
2MP CMOS Image Sensor
Signal System:
PAL/NTSC
Effective Pixels:
1920(H)*1080(V)
Min. Illumination:
0.01 Lux @ (F1.2,AGC ON),0 Lux with IR
Shutter Time:
1/25(1/30) s to 1/50,000 s
Lens:
Pan: 0 - 360°, Tilt: 0 - 180°, Rotation: 0 - 360°
Lens Mount:
M12
Adjustment Range:
Pan: 0 - 360°, Tilt: 0 - 180°, Rotation: 0 - 360°
Day& Night:
IR cut filter with auto switch
Video Frame Rate:
1080p@25fps/1080p@30fps
HD Video Output:
1 Analog HD output
Synchronization:
Internal Synchronization
S/N Ratio:
More than 62 dB
General
Operating Conditions:
-40 °C - 60 °C (-40 °F - 140 °F)
Humidity 90% or less (non-condensing)
Power Supply:
12 VDC±15%
Power Consumption:
Max. 6W
Weather Proof:
IP66
IR Range:
Up to 80m
Dimension:
86.7 mm × 81.6 mm × 226 mm(3.4" × 3.2" × 8.9")
Weight:
430 g (0.95 lb)

Outdoor Camera

Outdoor Camera,Outdoor Surveillance Camera,Waterproof Outdoor Camera,Outdoor Wireless Camera

Shandong Shinaian Trading Co., Ltd. , http://www.cnpcworld.com