General classification and characteristics of monitors

The monitor on the market today can be described as a wide variety of brands, models, and sizes. Under normal circumstances, understanding the monitor's knowledge can be mainly exposed to the following aspects:

According to size: 15/17/19/20/21/22/26//27/32/37/40/42/46/52/57/65/70/82 inch monitor, etc. by color: color, Black and white monitor by material points: CRT, LED, DLP, LCD, etc. According to the scanning method: flat, progressive scan, etc. Press screen: flat, universal, spherical, etc. By brand: TCL monitor, Hizor monitor , SONY monitors, JVC monitors, etc. by application: security monitor, monitor monitor, TV monitor, industrial monitor, computer monitor, medical monitor, etc. by type: LCD monitor rear projection CRT monitor plasma LCD monitor with high definition, low power consumption, long life (up to 80,000 hours), and low maintenance cost. The disadvantage is that there is patchwork when splicing, and now 40, 42, and 46 inch LCD monitor splicing gap is about 20MM. Rear projection is characterized by no seams, the disadvantage is large, power consumption, short life (usually 5000 hours to change the bulb) low brightness (middle light dark)

CRT This product is being replaced by the other three products.

Plasma has the advantage of high brightness contrast. The disadvantage is that it is not suitable for displaying static images (causing the screen to burn), and it consumes a lot of electricity. There are joints according to the manufacturer's points: Japanese Sony monitors, Japanese JVC monitors and other brand monitors are 15-inch and 17-inch. 19-inch, 21-inch, 24-inch, 27-inch, 25-inch OLED screen monitor and more.

1.Quality pass Germany TUV testing. Tuv testing is third safety certificate company,.more authoritative.

2. This system welding machine use Surface Mount System to install electron component and the main PCB board is single .So this system could make the machine`s quality is very stable. Rise the quality consistency.   

.

3.The power tube of the switch use germany infineon only.The PCB board thickness size is 2.7mm. 

4.The insert component use Taiwan KSS.

5.The aluminum web wing is more bigger and weighter than normal.

6.Passed EMC certificate and get the EMC certificate. According to IEC 60974-1 standard.

7. Our machine`s input voltage is auto change between 85V-240V.So could work under any voltage. Like japan 110V or America 110V AC. Like European 220V-240V AC. Like Brazilian 110V/220V together AC.

8.CEL. Could weld Cellulose electrode easy.

9. Welcome any customer to make your design. We have advanced exploit troop.

10.PFC (Power Factor Correction is more than 98%. So according to energy conversation ,environmental protection and low-carbon.

11. VRD make no-load output voltage under 24±2V, But when arc strike twinkling could rise working output voltage.So this technique could have more physical protection.


Welding Tools

industrial Welding Machine,Pigeon Welding Machine,Family Quality Welding Machine

YongKang WALMA Tools CO., LTD. , http://www.walmatools.com