For those who value individuality and seek to achieve a visually appealing home decor, large-scale home improvement stores can save time by offering a wide range of ready-to-use solutions. However, if budget is a concern, it's wise to visit medium- or low-cost hardware markets that provide a comprehensive selection of building materials. These places may require more time for comparison, but careful decision-making can lead to significant savings without compromising on quality.
1. Hardware components such as hinges, drawer slides, and cabinet handles are essential in furniture assembly. Door hinges are typically made from copper or stainless steel. A standard single hinge measures 10cm x 3cm or 10cm x 4cm, with a central shaft diameter ranging between 1.1cm and 1.3cm, and a wall thickness of 2.5mm to 3mm. When selecting hinges, ensure they open smoothly and quietly, ideally with ball bearings inside the pivot to reduce noise and increase durability.
Drawer slides come in two or three-piece designs. The quality of the exterior finish, along with the smoothness and strength of the roller, affects how easily the drawer opens and closes. It’s best to choose rollers that wear evenly and rotate freely for long-term performance.
Cabinet hinges are available in detachable and non-detachable types, with cover styles including large arc, medium arc, and straight. In addition to checking the surface finish and smoothness, pay attention to the spring’s reset function. A good hinge should open up to 95 degrees and maintain stability when pressed from both sides, ensuring strong support and no deformation.
2. Handles, knobs, and lock mechanisms are made from various materials such as zinc alloy, copper, aluminum, stainless steel, plastic, wood, and ceramics. Their shapes and colors vary widely to match different furniture styles. Electroplated or electrostatically painted handles offer better resistance to wear and corrosion. They should also be durable enough to withstand heavy pulling—ideally over 6kg of force.
As traditional ball locks become less popular, modern three-in-one handle locks have gained popularity in home decoration. These locks come in various materials, including aluminum, stainless steel, die-cast copper, and zinc alloy. High-quality materials like stainless steel and space aluminum offer a bright, smooth finish and are resistant to rust and discoloration. Die-cast copper locks are thicker and more expensive, while some inferior zinc alloy locks may break easily. It's important to distinguish between them—copper locks have a reddish hue, while zinc alloy ones appear silver-white.
3. Stainless steel pendants, baskets, and racks are commonly used in kitchens and bathrooms. Kitchen baskets, multi-tiered racks, and spice holders are popular choices. These products are typically made from steel or iron wire and welded together. Zhejiang-based manufacturers use stainless steel with fine wire, though their plating may not be as smooth. Guangdong producers often use thicker base wires with more advanced welding and plating techniques. When purchasing, consider weight capacity based on your needs.
Bathroom towel racks and soap shelves are usually made from copper tubes coated with chrome plating. The tube walls should be at least 1.0mm to 1.2mm thick. Since bathrooms are damp, it's important to check the flatness of the shelf and ensure the welds are solid and smooth.
**Stay alert for surprises**
**Tags:** home decoration, small hardware purchases, smart shopping tips
**Previous:** AC Motor Inverter Common Faults and Solutions
**Next:** Ceramic Bathroom Carcinogen Culprit: Excess Zirconium Silicate
| product description | Square rainfall head concealed thermostatic Faucet mixer shower set |
| Brand Name | HP |
| Material | Brass main body and Brass&ABS handle |
| Material Analysis | Cu≥ 59% |
| The Thickness of chrome plating | Nickel:7.5-9.5um Chrome:0.25-0.45um |
| Salt spray test | 24h |
| Water flow | Bath/shower mixer ≥ 18L/min |
| Operating pressure | 0.05 Mpa-0.8 Mpa |
| Recommend pressure | 0.1 Mpa-0.5 Mpa |
| if>0.5Mpa Installation of a flow reducer is recommended | |
| Cold water temperature | 4℃-29℃ |
| Hot water temperature | 50℃-80℃ |
| Temperature range | 20℃-50℃ |
| Security stop | 38℃ |
| Cold water supply failure test |
Within 5 seconds after cold water supply fails, outflow rate automatically drops to 1.9L/Min, outflow quantity:≤150ml |
| Life test | CSA B125-98 ASSE 1016(<=100,000 cycles) |
| Outflow temperature Auto-adjusting sensitivity |
When inlet water temperature or pressure varies, outlet water temperature change will be less than ±2℃ |
| Application |
For family bathroom, hotel bathroom and so on |
| Standard Apply | CSA B125-98 ASSE 1016 |
| EN1111 AS-4032.1,cUPC | |
| Quality Guarantee | 5 Years Quality Guarantee |
Square Concealed Shower Set,Concealed Shower Mixer Set,Concealed Brass Square Shower Set,Square Mounted Concealed Shower Set
KaiPing HuiPu Shower Metalwork Industrial CO,LTD , https://www.hp-shower.com