Floor covering is the highlight of home decoration. What kind of floor, how to install it, how to accept it, this is a concern of the decoration family. Today, Xiao Bian will summarize the decoration and acceptance notice for the autumn decoration floor. I believe that understanding this knowledge, everyone will be more effective in paving the floor.
Moist floor is easily damaged
In general, the moisture content of the floor is maintained at 8%-13%. However, if it is improperly laid and used, it will cause quality problems on the floor, such as no moisture treatment when laying; wet with water or scrub with soda water or soapy water, which will destroy the brightness of the paint; the bathroom and the room floor are not well done. Isolation; no attention is paid to the curtains in the summer, so that the floor in front of the window is discolored and cracked after exposure to hot sunlight; or the temperature of the air conditioner is too low, causing the temperature difference between day and night to change too much, causing the floor to expand or contract excessively and cause deformation and cracking. Wait.
In addition, moisture resistance is the most important technical indicator of wood flooring. The floor with poor moisture resistance performance, under the long-term "steaming" of geothermal heat, once the moisture enters, the edge of the floor must be lifted, causing damage to the floor. The high-quality floor is made of high-density substrate, which has excellent moisture resistance, and the water absorption thickness expansion rate is far less than the national standard. In addition, the special wear layer, decorative paper and balance layer can “close†the substrate well, which ensures the overall moisture resistance of the floor is better.
Three-point quality seven-point installation
There has always been a saying in the flooring industry that the wooden floor is a "three-point floor seven-point installation", that is, the installation is good or bad determines 70% of the floor quality. The unsatisfactory use of the floor is caused by the fact that the floor covering is not in place. The problem of floor covering has become a persistent problem that restricts the use of the floor.
To avoid unpleasant floor repairs, it is more important to do a good job in sales. Professionals told reporters that before the floor installation, the staff must carry out four different aspects of measurement preparation, which can greatly enhance the accuracy and precision for the later construction process, and can effectively detect the "sand, tide, concave" of the ground. The specific degree of the five major problems, such as convexity and fissure. In addition, the staff should pay special attention to the flatness of the ground. If the ground is flat, the bottom of the floor will not be arched; if the ground is not wet, the floor will not expand, and these should be carefully tested.
Paving the floor also says "everyday"
The paving of the floor is not arbitrary, but the principle of paving the "good times and the right people". According to the online expert of Beijing Decoration Network, due to the large temperature difference between day and night, attention should be paid to the prevention of moisture in the paving of floors and floor tiles. Therefore, before the paving of the wooden floor, it is best to put it at room temperature of 16 ° C to 18 ° C for two days. In addition, the time to install the floor is best selected in the "time and place" period. Simply put, the weather refers to the fine weather. It is best to install it on the ground for about 7 days. It is not raining. The location is the requirement. Do not install the floor before the ground is dry. People must find professional workers. You install the floor. At the same time, a professional moisture-proof floor mat is placed under the floor to prevent the floor from getting wet.
In particular, it should be reminded that within 48 hours of floor covering, avoid walking and placing heavy objects, leaving enough time for the adhesive bonding of the floor. The newly laid floor is best cleaned with a vacuum cleaner or broom.
Moisture-proof mats are not as thick as possible
The floor mat is the partition between the floor and the ground. It mainly plays the role of moisture-proof and balance in the laying of the floor. The floor mat products sold in the market can generally meet the basic requirements of users. Now some brands have also launched A variety of "functional mats", such as aluminum film mats, special plastic mats, paper mats, etc., users can choose to use.
In the market visit, the reporter found that there are many kinds of floor mats, such as ordinary floor mats, aluminum film mats, plastic film mats, special plastic mats, moisture-proof paper mats and so on.
The plastic film floor mat mainly depends on its toughness, and the good floor mat has good toughness. The aluminum film floor mat should pay attention to whether the aluminum film and the plastic film on the surface are tightly bonded, and the good aluminum film mat is used for it. That layer of aluminum film is not easy to fall off. In addition, you should pay attention to the purchase, the floor mat is not as thick as possible, generally about 2 cm. If it is too thick, the floor has a lot of room for manoeuvre, and it is easy to arch when the time is long.
Experts also said that from the point of view of moisture resistance, even the best wood flooring is no more than the most common plastic film. Because it looks like a dry ground, there will be moisture evaporation when heating, so it is required to use PE moisture-proof film in geothermal heating. However, the PE moisture proof film is also required to have a certain thickness and good environmental protection.
Knee and Elbow Pads,Knee and Elbow Supporter,Elbow Pad,knee Pad
Bulletproof Vest,Bulletproof Shield,Co., Ltd. , http://www.bulletproof-equipment.com