Do you like to use a shower or a bathtub when you take a shower? Personally prefer to soak in the bathtub, not only comfortable but also enjoyable. If you have a jacuzzi, it's even better! After a long time of use, the jacuzzi will be damaged, so it should be repaired. Then let Xiaobian take everyone to look at the relevant introductions about the exciting contents of the Jacuzzi maintenance .
First, the jacuzzi repair - common faults
To know how to repair a jacuzzi, we need to know where the common faults in the jacuzzi are, because the bathtub needs to be repaired according to different faults, and the common faults in the jacuzzi include:
1. The bathtub cannot enter the water;
2, the bathtub leaks;
3. The bathtub is not energized or the leakage protection switch trips;
4, can not adjust the size of the bathtub massage water;
5. The bathtub control panel cannot be activated. This is the most common fault in the bathtub. The fourth and fifth points are for the malfunction of the jacuzzi. Different faults require different repair methods. What is the bathtub repair method?
Second, the massage bathtub repair - maintenance instructions
Today, the jacuzzi on the market is generally made of acrylic, steel and cast iron. The acrylic bathtub is rich in shape, good in heat preservation and easy to clean, but its surface hardness is low and the surface is easy to scratch; Although the surface of the steel jacuzzi is smooth, it is not impact-resistant and can be easily cracked. The cast iron jacuzzi is rather bulky and can easily be knocked out during the handling process, regardless of the jacuzzi. When you grow up, there will be a variety of situations. Due to the high cost of the bathtub, the value of the sale on the market is also high, so in the face of a series of problems, it is generally not replaced, but the bathtub repair.
Third, the massage bathtub repair - maintenance method
The method of repairing the bathtub is one-to-one. The bathtub is not filled with water. Generally, the faucet is blocked by foreign objects. Therefore, the maintenance method is to clean foreign objects. The maintenance method of the bathtub leak is to check whether the faucet valve and sealing rubber ring are damaged. Then, it can be replaced; if the jacuzzi is not energized, the power cord is not in good contact or the power circuit is leaking, and the corresponding maintenance can be performed; if the hydraulic pressure of the jacuzzi cannot be adjusted, it is likely that the suction of the pump is not enough. Need to check and repair, or the nozzle is blocked, and can be restored to normal.
Fourth, the jacuzzi repair - crack repair
The causes of cracks in bathtubs are divided into cold cracking, hot bursting, and impact cracking. The crack repair method is the same regardless of the crack. If the crack is serious, it is recommended to ask the professional to carry out the repair; for small cracking, the adhesive of the corresponding bathtub material can be used for bonding. Of course, the adhesive which is non-toxic and harmless to the human body should be selected. After the bathtub is cleaned and wiped dry, the adhesive can be used. After it is dry, it can be tested to see if it leaks. If it is not leaking, it can be put into normal use.
How about, read the above introduction to the repair of the jacuzzi, did you understand a lot of related content of the massage bathtub repair. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
1. Product name:
2. Product introduction:
AKD High Polymer Emulsifier (instead of traditional cationic starch based) is a kind of cationic polymer product developed by our technical department,which is the initiative developed product in the market.It can not only emulsify AKD Wax ,but also proteched the AKD colloid dispersion and aid retention,it also can increase AKD sizing efficiency(2%-8%).It can get the high stability and better fixing effect AKD emulsion by mechanical stirring,in the meantime it greatly decrease AKD hygrolysis during storage and sizing process.Final AKD Emulsion shelf time is about 6 months which is longer than starch emulsified AKD emulsion.The final AKD Emulsion also has quicker curing effect.
3.Specification and Index:
|
Item |
Specification |
|
Appearance |
light yellow viscosity liquid |
|
Solid content |
40%min |
|
Viscosity,mPa.s,25°C |
2000-10000 mPa.s |
|
pH value |
2-5 |
|
shelf life |
6 months |
4. Application:
This Emulsifier greatly restricts the AKD hydrolysis and the migration aptitude.It can replace the Starch Based Emulsifier and AKD Curing Agent,at the same time decrease the AKD WAX using quantity.The final AKD Emulsion by this high polymer emulsifier can realize 80% sizing effect after paper machine,and almost totally realize after rewinding,which can let the paper immediately get the good water resistance effect,so less surface sizing agent in size press can fulfill all the sizing requirement.For detail using method,please contact Greatland Chemicals Co.,Ltd.
5. Package and storage:
It should be stored in the warehouse with dry and cool condition protected from frozen and sunlight directly. The temperature should be below 30°C.
Packing with 200kg, 1000kg/drum.
High Polymer Emulsifier
High Polymer Emulsifier,40% High Polymer Emulsifier,AKD High Polymer Emulsifier,AKD Emulsifying Agent
Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com