Sockets are things that people use in their daily lives. Basically, every household is inseparable from the use of electricity. There are also many household appliances in the home, such as TV sets, refrigerators, computers, etc. Therefore, you must choose a better and more durable in the selection of the socket, and it can be safe, but the socket will be bad, then what should I do if the socket is broken ? Let's take a look at the decoration network. The repair procedure and replacement precautions for the broken socket.
The reason the socket is broken:
The reason why the socket is broken is generally two cases. One is that the socket socket is in poor contact, and the other is that the power cord behind the socket panel is connected. In the case of poor socket contact, only a new outlet can be replaced, and if the power cord is disconnected, repair can be performed.
The socket is broken and the repair steps are:
1: Use a screwdriver to remove the socket panel.
2: Use a screwdriver to unscrew the screws on both sides of the socket.
3: If the power cable is disconnected, you can tighten the screws of the terminal; if you are replacing the new socket, you can screw the screws on the terminal to the loosest, and connect the neutral, live, and ground wires to the terminal. The terminal marked with the letter L is connected to the fire line, the terminal marked with the letter N is connected to the zero line, and the other terminal is connected to the two-color ground line. Remember not to damage the core.
4: Place the socket in a fixed position and screw the left and right screws.
5: Before the socket panel is buckled, the air can be pushed open for testing.
6: If it can be used normally, you can put the socket panel on.
The socket is broken and the replacement notes:
First, the socket can not be installed on the flammable object. In case the combustible object burns, the jacket of the socket will be burnt out, which will cause the core to be exposed, and the water vapor will enter, which will cause a short circuit and even cause a fire.
Second, the wall socket should be installed with arc extinguishing device, in order to avoid the risk of fire or explosion due to leakage of flammable gas.
Third, the wall socket is installed with clear and concealed parts, the wall mounted can not be less than 1.8m, the concealed installation can not be lower than 0.3m, the socket between the kitchen and the bathroom should be 1.5m higher than the ground, and the air conditioning socket should be higher than 2m.
Fourth, the wiring must follow the principle of "fire line into, zero line into the lamp head", the socket must be installed with leakage protection device.
5. It is best to install a protective box or baffle on the wall socket to prevent water or oil from seeping in, causing short circuit or leakage. Especially in families with children, in order to prevent children from touching their hands while playing, they may be exposed to electric shock.
Sixth, the cable head inside the socket is broken, it is necessary to replace it in time, it is best not to use the bare wire head instead, which is prone to fire.
7. The wall socket in the kitchen cannot be installed above the cooktop because the temperature is high, which will cause the socket to overheat and be damaged.
The above content is the introduction of the repair steps and replacement notes for the broken sockets brought to you by everyone in this small series. For your reference, I believe that after reading this article, you will have a certain understanding of the broken sockets. I hope that I can I have provided some help to my friends who have broken the home socket. For more exciting home improvement content, please continue to pay attention to the decoration home network.
1.NO RUST & BPA-FREE: Rust Resistant, Anti-acid and Alkali Material, Non-toxic, No Contamination, No Metal smell, Easy to Use. will retain its original sharpness up to 15 times longer than steel blades. You will never need sharpening any more!
2.NO OXIDATION: Keep your vegetables free from oxidation when cutting with these ceramic knifes. Keep your vegetables meat & food fresh for a longer period of time.
3. Not for Cutting Bones, Coconut Shells or Super Hard objects.Do not use Ceramic Knife for chopping bone, prying, striking and it can dish-washing .
4. For safety's concern, the tip of the blade have been blunted
Ceramic Knife Handle,Copper Handle,Rose Handle,Color TPR Handle
BOHAO ENTERPRISE CO., LTD , https://www.yj-bohao.com