The sliding bearing is in surface contact, so a certain oil film should be maintained between the contact surfaces. Therefore, the following problems should be noted in the design:
1. The oil film can smoothly enter the friction surface.
2. The oil should enter the bearing from the non-bearing surface area.
3. Do not open the full ring oil groove in the middle of the bearing.
4, such as oil tiles, open the oil groove at the seam.
5, to make the oil ring oil is fully reliable.
6. Do not block the oil hole.
7. Do not form an oil-free zone.
8. Prevent sharp edges and corners from cutting off the oil film.
Container House(Modular Home)
Container House,Container House Plans,Container House For Sale,Container House Show
Metal Building MaterialsCo., Lt d , http://www.nbwallpanel.com