The installation of the water purifier is usually carried out by professionals of the water purifier manufacturer. However, there are still some problems that we must pay attention to when installing the water purifier. Let’s talk about a few precautions for installing the water purifier.
Tips: After you install the water purifier, you should first run the water purifier for about 20 minutes, then conduct a water quality test on the purified water to see if you can reach the nominal of the water purifier. Indicators, so you can do it in your heart.
1, power reserve:
Many water purifiers on the market (such as most RO machines) are motor driven, so power must be reserved next to the main unit. Therefore, it is recommended that everyone reserve the water purifier power supply line in advance when decorating, so as not to damage the decoration after the installation of the water purifier.
2. Space reservation:
In order to ensure that the kitchen space is neat, most water purifiers are now installed under the counter (cabinet), so there should be enough space for the water purifier before planning the cabinet space. What needs to be reminded here is that many water purifiers have a water storage tank, so don't leave space for the water purifier host when you reserve a position!
3, the purchase of the sink:
For users who install a water purifier under the counter, it is recommended to purchase a sink with a soap dispenser. In this way, when the water purifier is installed, there is no need to punch holes in the sink or the counter top, thereby avoiding accidents caused by punching.
4, sealing performance:
Paying attention to and testing the sealing performance of the various connections of the water purifier waterway is a step we must pay attention to. It is recommended that you do not let the installer leave immediately after the installation of the water purifier. First, test the machine for about 30 minutes to make sure that the functions are normal and the seal is good and the workers are not allowed to leave.
Copper(II) Acetate, also referred to as Cupric Acetate, is the chemical compound with the formula Cu(OAc)2 where AcO− is acetate (CH3CO−2). The hydrated derivative, which contains one molecule of water for each Cu atom, is available commercially. Anhydrous Cu(OAc)2 is a dark green crystalline solid, whereas Cu2(OAc)4(H2O)2 is more bluish-green. Since ancient times, copper acetates of some form have been used as fungicides and green pigments. Today, copper acetates are used as reagents for the synthesis of various inorganic and organic compounds.
Copper(II) acetate has found some use as an oxidizing agent in organic syntheses. In the Eglinton reaction Cu2(OAc)4 is used to couple terminal alkynes to give a 1,3-diyne.
Cupric Acetate,High Purity Reagent Grade Copper Acetate,Copper Acetate for Paris Green Fungicide,Pharmaceutical Synthesis Grade Copper Acetate
Jiangsu Kolod Food Ingredients Co., Ltd. , http://www.kolodchem.com