Selection of glass partition wall manufacturers, construction of glass partition wall manufacturers

As the name suggests, partitioning turns a space into two spaces. The partition is very easy to use for small apartment methods. What is common on the market today is the glass partition wall. The glass partition wall is not only decorative, but also safe to use. However, some friends may not know much about the specific details, because the glass partition wall manufacturers are different, the glass partition wall materials are different, the production methods are different, and the materials are different.


玻璃隔断墙厂家


First, how to choose the glass partition wall


1. In the common glass partition, the ordinary glass partition is simple and clear, the stained glass partition is beautiful and refined, the sandblasted or carved glass partition is noble and elegant, and the cracked glass partition is ethereal and mysterious. The weird visual effects are all created by relying on different materials.


2. The glass partition of the crack effect must be crushed by special tempered glass and glued by special process. Therefore, there will be no two identical patterns, which is in line with the modern personality. The first point in choosing such a glass partition is to pick the pattern. The effect of crack stretching is good.


3, ordinary glass partition seems to be simple, but it is not. Among them, the laminated glass is still rare in the market.


4, most glass partitions for safety, will use tempered glass, the difference between tempered glass and ordinary glass is that tempered glass is actually a kind of prestressed glass, in order to improve the strength of the glass, usually using chemical or physical methods, formed on the glass surface Compressive stress, when the glass is subjected to external force, the surface stress is offset, thereby improving the bearing capacity, enhancing the wind resistance of the glass itself, cold and heat, impact and the like.


玻璃隔断墙厂家


Second, how to construct the glass partition wall


1. Measuring the pay-off line: measure the pay-off line according to the design drawing size, and measure the elevation of the base level, the central axis of the glass wall and the position line of the upper and lower parts of the 50*100 steel pipe;


2, fixed iron and steel pipe welding: according to the size of the design drawings to install the fixed parts, fixed with expansion bolts, and then put 50 * 100 steel pipe. Straighten and straighten, then solder and fix. Non-stainless steel parts are painted with anti-rust paint;


3, glass block installation and positioning and stainless steel plate: 12mm tempered flat glass are all customized in professional manufacturers, shipped to the construction site. First clean the glass block, place the rubber pad on the steel pipe, fix it with stainless steel tank, place the glass block in the installation slot with glass mounting machine or conveying suction cup, leveling, vertical and fixing, all the same glass wall is installed. Flat, vertical installation of stainless steel plates;


4. Injection: first clean the upper and lower parts, the side glass trough and the glass joint injection, and then stick the glass and stainless steel plates on both sides of the glue with white tape to leave the position of the glue joint. The stipulation requires that the glue be injected, and the same seam shall be scraped flat after one-time injection, without stopping. (Note: a glue injection joint must be dry to inject glue, avoid moisture; b glue on the upper and lower stainless steel tanks is structural silica gel, the glue injected between the glass blocks is transparent glass glue).


5, clean and hygienic: the installed glass block is cleaned with a special glass cleaner. (Do not wash with an acidic solution).


I believe that everyone has a certain understanding of this aspect. We use the glass partition in the decoration, which is the most, because the glass partition has many advantages, and the decoration effect it makes is relatively beautiful. The last thing to note is that the glass partition wall manufacturers have to choose the right one. If you want to know more, please continue to pay attention to our decoration home network.



More related wonderful reading:

The type of family glass partition wall, the advantages of the family glass partition wall

How to choose a bathroom glass partition wall? What are the precautions?

What are the characteristics of the glass partition wall? What are the advantages of a glass partition wall?

Office glass partition office glass partition wall price

Glass partition wall price type of glass partition wall

Other Locks

Electronic Locks,Cylinder Locks,Stainless Steel Locks,Stainless Steel Door Lock

Ningbo Hengchieh Locking Technology Co., Ltd. , https://www.hengchieh.com