Product Description
1.This hot air soldering gun is with thermostat temperature adjusting function, with overtemperature protection with result in convenient and save usage.
2.This heat gun is with imported motor and michrome wire as a result its working life is long and heating efficiency is hight.
3.This power tool hot air gun is with good quality heat insulation inside ensures longer using life of the heating filament.
Â
| Hot Air Gun JF-1600WD | |
| Power Input | Available In 220V |
| Temperature Range | 50-600 ºC |
| Temperature stability | ±1ºC |
| Noise | <45dB |
| Power Consumption | 1800W |
| Heating Element | Metal Heating Core |
| Air Capacity | 190-400L/Min(max) |
| Station Dimensions | 185H*242L(MM) |
| Package Size | 280*250*80(mm) |
| Gross Weight | 0.8 KG/Set |
Features
product description of digital hot air gun heat gun:
   • Import motor, high-performance, longer service life.
   • Imported biotite Ni-Cr alloy wire heating core, overheat protection device, rapid heating, power foot, long life.
   • Double vortex air outlet, soft wind does not damage the device.
   • Sensor closed loop, microcomputer zero trigger temperature control, temperature accuracy and stability.
   • Push-button thermostat 10 degrees a tune, the minimum temperature of 50 ° Maximum temperature of 600 °, the temperature can be adjusted within a wide range.
   • Three-speed electronic circuit to control air flow:190-400L/MIN
   • 20 seconds off delay, effectively extending the heater core life.
Application
1.Tin desolding ,thaw, depainting, plastic heating, lab vessel cleaning, liquid heat  ergy transfer, bond intenerating etc.
2.Various of nozzles and spare parts for choice;
3.Maximum power consumption reach 1800W,temperature 50-600°C,High efficiency and easy operating;
4.Temperature adjustable system.
Â
The Optical Turnstile ( Speed Gate , flap Barrier Gate , Swing Barrier ) are designed to work in a normally closed mode and retract inside the pedestal after a valid card has been presented to allow the authorized user to pass. This type pedestrian Turnstile Gate is usually used in bank lobby, office building, fitness club, school, subway station and so on. It prevents unauthorized people to enter the restricted areas.
Our optical Turnstile is a physical security device designed to restrict or control access to a building or secure area. Optical Turnstiles are usually a part of an Access Control system, which also consists of software, card readers, and controllers. Optical turnstiles operate much like regular mechanical turnstiles, except that they rely primarily on electronic (infrared) beams, and audible/visual interfaces to control entry. Rather than physically restraining a person, the optical turnstile uses sounds and lights to alert others to attempted entry by unauthorized individuals. For this reason, they are not likely to be used in subways and stadiums, as they are suited for settings where design and aesthetics are important, such as lobbies. They are perfect for high rise buildings with a single path through the lobby and staffed reception. The rate of people passing through the optical turnstile is high, with less delay than other methods. They are also suitable for the handicapped, as they are Barrier -free.
Optical Turnstile
Optical Turnstile,Optical Turnstiles,Optical Turnstile Gate,Optical Turnstile System
RS Security Co., Ltd. , http://www.rsteco.com