The installation of Siemens temperature control valve has some precautions. If it is not installed correctly, it will affect the use effect or cause damage to the Siemens temperature control valve, and even have some serious consequences. Therefore, Jinan Baitong Control Equipment Co., Ltd. gives a brief introduction to the installation of Siemens temperature control valve.
One. Unpacking inspection before installation:
1. Generally, the Siemens temperature control valve will undergo strict inspection before it is re-factory. However, please check before installation to see if there is any defect or damage.
2. Please check the quantity and model of Siemens temperature control valve according to the order and delivery packing list.
3. Please check according to the above quantity configuration to check if there is any damage during transportation.
two. Installation location requirements:
1. The valve body of the Siemens temperature control valve should be installed near the inlet of the primary side heat medium.
2. The electric actuator is connected to the valve body of the Siemens thermostatic valve.
3. The water outlet/air supply sensor is installed near the exit of the secondary side.
4. The outdoor temperature compensation sensor (if selected) is installed in the outdoor shade, the height from the ground is ≥2.5m, and pay attention to keep away from the doors and windows.
5. The electric control box and controller should be installed near the equipment for easy operation.
Jinan Baitong Control Equipment Co., Ltd. reminds users that any installation operation that does not meet the requirements may result in damage to the Siemens temperature control valve or affect the use effect. Jinan Belden Control Equipment is committed to promoting advanced technology and excellent products to provide first-class products and services to our customers.
Product Index: Siemens temperature control valve, Siemens electric temperature control valve, Siemens electric control valve
High intensity Reflective Film is composed of high-intensity retroreflective glass microbeads bonded to pressure-sensitive adhesive. It is compaction to cover the hard surface of the object, the improvement of the object or wearing in the sea at night or poor view of the visible plays a very significant role. Especially for the use of life-saving supplies at sea, and now these products are welcomed by many countries and related organizations and become the International Maritime Organization and the United States Coast Guard approved marine special materials.
SOLAS Grade Reflective Film, SOLAS Reflective Tape, SOLAS Grade Pressure Sensitive Adhesive Film
Daoming Optics & Chemical Co., Ltd , http://www.reflectives.nl