Color tile die damage correction 7 methods Due to the high frequency of the use of the tile machine in the production process, it will inevitably cause damage, but some small damage can be repaired and reused, thus reducing waste and production costs. Correcting the small defects of the colorful tile machine molds is now a must-have method for reducing waste in the production line of tile machines. Different damages have different methods to correct. Here are some commonly used methods for repairing several kinds of color tile molds for your reference:
1. For the tile dies that have burr defects, correct them by grinding wheel cleaning or shoveling.
2. The damage to the upper mold of the tile tile die is not serious, or the tile tile die with a small pit can be forged once again in the new mold, or it can be corrected by the method of repair welding.
3. For the underpressure (under die forging), the tile machine mold can be corrected by pre-processing in the machining workshop. This type of under-swaged forging is best not to be re-swaged, as this may become an irreparable waste product because the newly generated scale presses into the forging. For unimportant tile tile molds, it can be reheated once to modify the excess metal into scale.
4, for the wrong way to move the tile mold correction method is to take another re-forging time. If the misalignment is serious, it cannot be corrected. If the misalignment is not serious, it can be corrected by polishing.
5, for the deformation of the tile mold, can be used to correct the temperature of the heating to the forging, or in the cold state with a press for correction.
6, for the overheated tile tile mold normalization method can be used to correct. When the forging hardness is too high or the toughness is insufficient, it can be corrected by repeated heat treatment.
7, for over-burning, sandwich, quenching cracks and serious shape defects and other defects. It is the last scrap, no longer correct.
The above seven correction methods for the light damage of the color tiles machine mold are indispensable technologies in production.
Telephone; 13182470770
1. For the tile dies that have burr defects, correct them by grinding wheel cleaning or shoveling.
2. The damage to the upper mold of the tile tile die is not serious, or the tile tile die with a small pit can be forged once again in the new mold, or it can be corrected by the method of repair welding.
3. For the underpressure (under die forging), the tile machine mold can be corrected by pre-processing in the machining workshop. This type of under-swaged forging is best not to be re-swaged, as this may become an irreparable waste product because the newly generated scale presses into the forging. For unimportant tile tile molds, it can be reheated once to modify the excess metal into scale.
4, for the wrong way to move the tile mold correction method is to take another re-forging time. If the misalignment is serious, it cannot be corrected. If the misalignment is not serious, it can be corrected by polishing.
5, for the deformation of the tile mold, can be used to correct the temperature of the heating to the forging, or in the cold state with a press for correction.
6, for the overheated tile tile mold normalization method can be used to correct. When the forging hardness is too high or the toughness is insufficient, it can be corrected by repeated heat treatment.
7, for over-burning, sandwich, quenching cracks and serious shape defects and other defects. It is the last scrap, no longer correct.
The above seven correction methods for the light damage of the color tiles machine mold are indispensable technologies in production.
Telephone; 13182470770
Automatic Magnetic Door Operator
Magnetic Locking System,Magnetic Door Lock System,Magnetic Door Opener System,Magnetic Electric Sliding Door Operator
Caesar door control co.,ltd , http://www.caesar-door.com