ã€China Aluminum Network】 The first thing to note is that when cleaning, it cannot be used on aluminum frames, nor can it be used as a support. This will cause more damage to aluminum doors and windows.
Aluminum windows and doors can be used soft cloth dipped in water or neutral detergent, ordinary soap and detergent must be avoided, dirt, toilet cleaners and other strong acid and alkali cleaners can not be used, or will corrode profiles.
If it is found that the seal tops and glass glue fall off, repair them in time and replace them. Ensure aluminum doors and windows sealed and warm.
In addition, dry the glass and window frame in time after the rain. Because the aluminum doors and windows are not stainless steel doors and windows, it does not have anti-rust function.
Always inspect the joints of the door and window frame, tighten the bolts in time, and replace the damaged parts. Positioning pins, wind braces, floor springs and other vulnerable parts of aluminum alloy doors and windows, should be checked from time to time, regularly add oil to keep clean and flexible.
Aluminum doors and windows in use, the action should be light, push and pull naturally. If you find it difficult to pull hard and hard, you should first troubleshoot. Ash, deformation is the main reason for the difficulty of sliding aluminum alloy doors and windows, to keep the door frame clean, especially the push-pull tank cleaning. Vacuum cleaner can be used to suck the dust in the groove and door seal tops.
Check the aluminum door and window frame wall joints frequently. If the aluminum doors and windows are loose, it will easily deform the frame as a whole, and the doors and windows cannot be closed and sealed. Therefore, the looseness of the screws at the joints should be tightened immediately. For example, the screw bases should be loosened, and a small amount of cement should be adjusted by applying epoxy glue.
Postscript, aluminum doors and windows are not stainless steel doors and windows, maintenance should not be touched, the cleaning process should be light to avoid causing greater damage to the doors and windows.
Uhp 400 Graphite Electrode,Graphite Electrode Rp Hp Uhp,Graphite Electrode 400 With Nipples,Electrode Graphite Uhp 400
Carbographite Industrial PTE.LTD , http://www.carbographite.com