Brand Shop: Smic Tiles
The simplest on-site detection method for home tiles is:
1. Spread more than four products in the same direction as the bottom of the trademark on the flat sand surface, set an expansion gap, to see whether the four sides of the junction is smooth and no obvious "kicking" phenomenon.
2. Use a ruler that is greater than or equal to the length of the side of the brick and place it directly 5 mm from the edge of the tile. Use an appropriate feeler, from a large value to a small value, into the gap between the ruler and the brick surface. The deformation value is the deformation value of the product.
3. It is not correct to place two products face to face to observe and measure the flatness; it is also not correct to use the eye to visualize, or to use two bricks to rotate on a flat ground or table. The commonly used detection method is to use a ruler to detect.
4. A simple method to detect the deformation of the tiles: Two people use the two deformed tiles by hand, and use bricks to butt the tiles to see if they are flush. If there is a large difference in the deformation of the two bricks, use 1 method to test, if you want to know whether the product's deformation value exceeds the standard, then use 2 methods to detect.
5. According to the requirements of different types of products, clearances must be reserved when trial products are placed. In particular, the characteristics of products such as antique tiles, elegant sandstone, and natural surfaces determine that a gap of 5 to 15 mm must be reserved when paving.
Links: The best selling tiles in the group recommended to create civilian luxury
Tiles Buy Antique Tiles
2 Side Grit 600/1500 Sharpening Stone
Waterstones Online,Sharpening Stones,Grinder Sharpening Stone,Sharpener Stone Set For Knife
ZHE JIANG DONGYANG WEIWEI INOUSTY COMMERCE CO.,LTD , https://www.cnwwsy.com